Jump to content
SAU Community

Recommended Posts

After forking out $1000 over the last few years for intercooler piping dump pipes exhaust systems to be fabricated i finially decided it was time to learn to tig and start saving my self some money(Not to mention a heap more tinker time, we all love tinker time).

I looked around at all the TIG options for the last month and decided a simple little 180amp DC TIG would do the job.

Headed down to WeldSmart in Perth's southern suburbs to buy my new toy. I must say the sales guy was good, I ended up walking out with a 200amp AD/DC Tig for a very discounted price.

http://www.weldsmart.com.au/welding-australia/tig-welders-gtaw/tig200acdc-pulse-200-amp-tig-pulse-mma-inverter-welder-new-euro-design

post-28286-0-60397300-1339920239_thumb.jpg

This is the same welder BOC sell for over $2000

The welder came with a tig tourch, ARC Lead and foot pedal.

Had a bit of a play with it the next night, using the left over MIG gas my mate had.

Here are our not very pretty extreme amature results:

post-28286-0-32701000-1339920760_thumb.jpg

post-28286-0-75140800-1339920779_thumb.jpg

post-28286-0-05607700-1339920793_thumb.jpg

post-28286-0-81120100-1339920811_thumb.jpg

As well as the crappy welding I got some nice UV burns on my arms and slight warming up on the face. Lesson learned long sleve shirt is a must.

Spend the next night watching youtube videos and researching how to properly setup the TIG and learned the importance of working with clean materials. A simple wirebrushing is not enough.

So today armed with a bit more knowledge i managed to do a little better:

post-28286-0-82362100-1339921196_thumb.jpg

We also started modifying an old trolley that used to have a wodden top to be our new welding bench.

Here are some pics of a new steel plate being welded to the top of the bench:

post-28286-0-29427400-1339921339_thumb.jpg

post-28286-0-72473900-1339921357_thumb.jpg

post-28286-0-43906600-1339921374_thumb.jpg

Here is a pic of a longer weld ground down flush, You can see the weld penetrated pretty well:

post-28286-0-06154700-1339921391_thumb.jpg

I will update this thread in the next few days with the finished bench, as well as any other work I do.

Edited by Crans
Link to comment
https://www.sau.com.au/forums/topic/402764-the-start-of-my-welding-adventure/
Share on other sites

Welding finished on the table.

post-28286-0-80216500-1340031002_thumb.jpg

We didnt tack it down enough so the top warped quite a bit, not to worry its just a dodgy welding surface, atlease 1 half if fairly straight

A few more practive welds. Need to get better at moving faster and feeding filler without stopping all the time.

post-28286-0-55572300-1340031081_thumb.jpg

Havn't started using the foot pedal yet. Getting used to using the thing first. I suspect the foot pedal will weld with the slight holes at the end of some of the welds.

Basically it will just let you adjust amps on the fly, ATM i am just adjusting it on the machine

Connect up the foot pedal if your bench welding.

You actually want to slow down looking at some of those welds.

Slow down and allow the weld to pool properly before adding rod

Use the foot pedal and try to run a consistent pool along 3mm without filler rod. Once you can control the pool then start adding rod

Thanks for the tips I though i was going too slow?? That probably means im running too high amperage??

More practive thursday, can't wait for my 15amp socket to go in so i can bring the welder home.

Great to see you having a good cracking.

First thing before considering anything else, make sure the materials you are welding, as well as the tungsten and gas cup are clean. Doesn't matter what you do, if these aren't clean you will just frustrate yourself in trying to improve.

From there on, throw the filler to one side and just learn to run welds with no filler.....and go from there.

Cheers,

Ariel

There not looking too bad at all. What welder did you get?

Did a trial run today on modifying a turbine housing and connecting a waste gate to it.

We did not pre heat or slow cool the cast housing on this trial, but we will be doing it properly when my new t67 arrives this week.

post-28286-0-15295700-1340516889_thumb.jpg

post-28286-0-63273000-1340516913_thumb.jpg

There are a few cracks, but mistly after griding it down i can see it welded ok, will be better with the proper pre heating. the the test pipe was quite thin and was very easy to blow through it.

Here is an internal pic showing the hole cit in the housing, we didnt cut it as big as we should have after all it was just a test.

The mill used is old and wiggled too much so we ended up using a die grinder. Will probably take me 4 hours to properly grid out a 44mm hole, had to constantly wait for the aircompressor to catch up.

post-28286-0-26092500-1340516931_thumb.jpg

Hopefully will have a finished product by the end of the week.

There not looking too bad at all. What welder did you get?

Just got a basic ebay one http://www.ebay.com.au/itm/Rossi-3-1-Inverter-Welder-TIG-Cuts-Welds-S06-/230786697998?pt=AU_Welding&hash=item35bbf58b0e#ht_2788wt_1044. Seems to work alright just only downside is its not AC so cant weld alluminium.

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...