Jump to content
SAU Community

Recommended Posts

Hey all hope use could help me with a few questions I have a 33 v spec I just took the motor out as doing some work and new shell ect, any way I was thinking of going single turbo just wondering what ya thoughts where? Is it worth it

But I main question is what sort of things do I have to change to go single? And what turbo do youse recommend my current mods are engine:

* low km reconditioned head

* HKS 272 cams

*CP forged pistons

* argo conrods

* balanced crank

* ACL race bearings

*Nitto oil pump

*new water pump

* sump baffle

* splitfire coils

* R34 N1 turbos

* stainless dumps

* 3"exhaust with HKS muffler

* metalcat

* walbro 500hp fuel pump

*700cc denso injectors

*adjustable fuel reg

*Z32 a/f meters

*apexi pods

*alloy radiator

*power fc

*greddy profec b ebc

*oil catch can

Drivetrain:

* Jim Berry carbonic race clutch

* nismo flywheel

*nismo slave cylinder

*cusco front diff

Let me know what you guys think:)

Depends what power you want really, I've had two RB26 set ups essentially and the one I have in my GTR now is the best I've had (the stock unopened motor is holding it back alot however) I have had 3 single turbo set ups on my GTR to date.

I'm currently running a Precision Billet series PT6262 turbo charger, un real response full 1.6 bar by 4200rpm on 98RON however with a built motor my peak power would be a lot better. Previous set ups have included a Garrett GT3582R and a Turbonetics T66 (plain bearing 0.90 roughly housing) I've never liked the poswer delivery of twins however they may have their advantages in the 3-360kw range. However I have no complaints since changing to a single high mount plus the maintenance is a hell of a lot easier :)

  • 3 weeks later...

Awesome thanks mate :) is it a lot of stuffing around to go to single? Sounds like you have some awesome setups!!

What do you have to change to go single? Do you still get aircon ect. I was reading that some people change a heap of stuff I'm not gonna go to big just something that looks nice and is resposive

if your arfter a bit more kick, why not just get some -5's? you have good supporting modes in place and they will just bolt up to your current setup. would be a cheaper option then going single.

single would require new intake piping, exhaust manifold, dumps and front pipe etc.

If your keen on the single route, i see alot of people getting good results with a t04z

Depends what power you want really, I've had two RB26 set ups essentially and the one I have in my GTR now is the best I've had (the stock unopened motor is holding it back alot however) I have had 3 single turbo set ups on my GTR to date.

I'm currently running a Precision Billet series PT6262 turbo charger, un real response full 1.6 bar by 4200rpm on 98RON however with a built motor my peak power would be a lot better. Previous set ups have included a Garrett GT3582R and a Turbonetics T66 (plain bearing 0.90 roughly housing) I've never liked the poswer delivery of twins however they may have their advantages in the 3-360kw range. However I have no complaints since changing to a single high mount plus the maintenance is a hell of a lot easier :)

What power are u making with 6262? What boost

Well it made 320kw on around 20psi which I'm

Not happy with however it may have something to do with the only mildly decent tuner up this way tuned it to around 10.8:1 afr's lol so it would make 350 or so leaned up a bit... However I was also after a bit of life from the stock motor to so I'm not complaining.

Going to a single was the best thing I ever did for my GTR, in terms of changing things that's par for te course however it's definitely worth it.

My GTR is currently getting parted out.... So my turbo set up is for sale complete with hot side piping, dump and front pipe to suit 32/33 GTR and intake pipe lol

Sedat i have been very impressed with precision turbo's. I hve just finished a r34 neo with 5558(precision) it made 367kw on 22psi ethanol and full boost at 3900,

I have just fitted a 6262 twin scroll onto my personal GTR which i was planning to tune this week but found a water leak under the plenum so i pulled that iff tonight.

My aim is 400kw with full boost at 4200.

U should go a 65 series or so for 450+kw

was this neo built or stock?

Sedat i have been very impressed with precision turbo's. I hve just finished a r34 neo with 5558(precision) it made 367kw on 22psi ethanol and full boost at 3900,

I have just fitted a 6262 twin scroll onto my personal GTR which i was planning to tune this week but found a water leak under the plenum so i pulled that iff tonight.

My aim is 400kw with full boost at 4200.

U should go a 65 series or so for 450+kw

Sedat i have been very impressed with precision turbo's. I hve just finished a r34 neo with 5558(precision) it made 367kw on 22psi ethanol and full boost at 3900,

I have just fitted a 6262 twin scroll onto my personal GTR which i was planning to tune this week but found a water leak under the plenum so i pulled that iff tonight.

My aim is 400kw with full boost at 4200.

U should go a 65 series or so for 450+kw

Jez

Wait....I'll send you a pm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...