Jump to content
SAU Community

Recommended Posts

Maybe email caltex and see if they plan to increase eflex availability in Canberra anytime soon?

Might flick them off something this afternoon.

Nicholls caltex, just off the barton highway

another southside somewhere.

it is not a practical solution in canberra yet as there's only 2 pumps

Okay so certainly on two pumps in Canberra?

E85 is only available at *non* woolworths Caltex outlets - Nicholls and one of the 2 in Kambah are the only non Woolworths branded ones in Canberra.

No plans for introduction at Woolworths Caltex outlets any time soon (an immediate family works in the Woolworths head office in Sydney).

Edit: and before anyone asks, Woolworths Caltex branded outlets are *not* Caltex, so ringing them wont help much - they are Woolworths Petrol with the fuel supplied by Caltex. Woolworths Petrol has no plans at the moment to introduce E85.

The "Star Mart" branded outlets are the Caltex owned/franchised shops and are the only ones that will stock E85 - aside from the 2 listed above, there are no other Caltex owned/franchises outlets in Canberra.

Edited by Amaru

wmi has no effect on your injector size, same size injectors you would run for what ever power it is on normal 98 as thats all you put in the tank.

good wmi kit 400-600, you then need to source your methanol and distilled/demineralised water, its not a complete retune its only a partial retune anywhere on the map after the WMI has turned on as thats the only place that will have any changes

for extra go fast you can mix in small amounts of nitromethane as well

You can get 20l drums of methanol for like $70 from a few places locally, which will last a fair while with street driving.

Distilled water is cheap as from any supermarket cleaning isle as well.

Kit will cost like 500-1000 depending on the setup you choose, but you should be able to put in yourself.

It's much of a muchness in cost difference I think, because setup/tuning costs are relatively similar and although eflex is cheaper, you can't go as far on a single tank. So that helps even the cost difference there as well.

You can always sell the kit and go e85 down the track if it becomes more widely available anyway...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...