Jump to content
SAU Community

Recommended Posts

Hey guys

I'm wondering if it's possible to tune a rb26 on 95 octane and still produce decent numbers with out detonation.

At the moment I'm living in the sticks and 95 is all that's available right now. I have developed a real pesky itch to buy another skyline and the fuel issue is the only thing holding me back.

Cheers

Scott

Link to comment
https://www.sau.com.au/forums/topic/404677-running-95ron-with-300kw/
Share on other sites

i reckon it could be done but youll be limited by how much boost you can run

otherwise you will just comprimise tuning for boost which will give you that doughey effect

many people overseas from memory run spazzo power on penis fuel so it can be done

if you were going to try i would do a reasonable timing map - maybe even just a bit of a tune of the stock map and then run a small amount of boost

and slowly increase boost and go from there

intake temp, engine compression and boost will all work against the lower octane so make sure these are managed well

ie dont have a hot pod sucking hot air

many people overseas from memory run spazzo power on penis fuel so it can be done

That's very different, you can't really compare our octane ratings with other countries octane ratings. Not only does altitude affect the fuels performance, but some places like USA and Canada use the Anti-Knock Index instead of RON, so their numbers look different to ours but are in fact the same or better.

Hey wedge_r34gtr

I sold my r33 before I came to Hedland and now that I'm making good money I want to splurge on an insane gtr but the only thing stoping me is the lack of 98ron.

The only places that sell the required fuel that I know of are Capricorn road house near newman and down karratha way which is quite unfortunate.

Thanks for the info guys, I might just go and buy a road bike instead.

Hey wedge_r34gtr

I sold my r33 before I came to Hedland and now that I'm making good money I want to splurge on an insane gtr but the only thing stoping me is the lack of 98ron.

The only places that sell the required fuel that I know of are Capricorn road house near newman and down karratha way which is quite unfortunate.

Thanks for the info guys, I might just go and buy a road bike instead.

As someone said above - water / methanol injection! Would be perfect and would help in the hot climate up there.

I just done some reading up on the aem setup and it sounds good.

Anyone had any experiance with water/methanol injection?

How long would a tank last?

would placing the nozzle infront of the throttle body be better than placing it infront on the turbo housing?

Any info would be very much appreciated.

I just done some reading up on the aem setup and it sounds good.

Anyone had any experiance with water/methanol injection?

How long would a tank last?

would placing the nozzle infront of the throttle body be better than placing it infront on the turbo housing?

Any info would be very much appreciated.

There's a 16 page thread just a few down ...

the piont is, it can be done if you can be bothered, have no other fuel choice and are prepared to spend some time learning about different setups

if you cant be bothered, expect instant results and want to run the same boost and setup as 98 then yeah it wont work, but if you are open to some research and other options then you can do it with comprimises

  • 1 month later...

im also in hedland and had my GT-R tuned for 95.

You do miss out on alot of power but i would not get a GT-R because of the lack of fuel. i know of many performance cars that have also been tuned for 95 and all run fine without a problem.

My 33 will be up for sale soon, if your looking.

Wasn't Mr Mafias original octane drama because he didn't have a local supply of 98 ULP ?

People I know that work there tell me its often very hot and humid and not the best conditions for high performance petrol engines .

Water injection sounds good and is possibly the only practical alternative if you can't get higher octane fuel or E85 .

Dusty dirty hot humid salt air , enemy of machinery . A .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...