Jump to content
SAU Community

Recommended Posts

Hey all,

Long time since Ive posted here. Anyway just looking to quieten down my car a little. At the moment its got the HKS Silent Hi Power exhaust(the one without the muffler), and its far from silent. Its a 3.5" exhaust pretty much just a long tube to a canon. Ive got another exhaust here which is the 3" Nismo exhaust which has a mid muffler and also the biggest rear muffler Ive ever seen.

If I swap these exhausts out will I notice a big drop in performance? I don't really do anything with the car which needs performance all the time. Just a daily driver to and from work and when out with the mrs. I figured since I granny drive the car I should keep her quiet(after seeing the ACA shit on TV and how cops are going to be cracking down on defective cars and mainly noisy cars, the least attention we attract the better).

I can live with power loss but if its going to cause my turbo to heat up much more rapidly which will raise intake temps and potentially cause det, that is what I can't live with..... We all know how strict HG is about high flowing exhausts with their turbos(SS2).

Any input? Are those nismo exhausts rubbish? Last I heard it on my car, I couldn't even hear the thing at idle and since the stock exhaust isn't even enough to stay legal, this one is quiet enough not to hopefully awake sleepy eyes when I finish those late shifts.

Hey Sarge,

What modifications have you got and how hard for how long do you run your Skyline?

Nismo is one of the best quality exhausts.

I dont beleive you will get too much of a drop in performance, the noise is alot quieter.

It's only going to cause a drop in power if it is a restriction. Which I doubt it will be. You mentioned the SS2, is that what you are running? At SS2 power levels, a 3" exhaust should be plenty. Just make sure it is a true 3", a lot of Jap exhaust systems have step-downs to around 2.5-2.75" which may well be a restriction. Not sure if the Nismo ones do this.

if its quiet it will most likely have a restrictor, when i put my old system on after it had a loud system, the silencer was having effects cause the car was running hotter, not pulling so hard and a couple of times i heard it knocking.. so you may need timing taken out.

I think TiTAN's statement is correct, its when you find a quiet exhaust with no mufflers(low profile crap you see online) which can shut the sound up but poses a massive restriction. The size of the rear muffler is f**king huge, if you've seen the Nismo exhaust you'll know what I mean. If you haven't its about two times the size of a HKS canon. The mid muffler is nice and big too. The pipes are full 3" all the way to the back. My old HKS was 3" then became 3.5" after the resonator in the middle.

Just fitted on the Nismo, honestly doesn't sound bad at all. It loses that tough raspy sound of the HKS but what I'm left with is a very nice quiet idle and a clean RB note. Only issue now is the damn gasket between the cat and the cat back is shaggered(its the multi plate copper thing). When backing off I can hear the plates flapping around so gonna need to replace it.

My car is all bolt ons(injectors, turbo, dump, ecu etc) for 255rwkw. Most of my drives are on average 15 minutes long. Sometimes the odd 40 minute drive. Never really take it anywhere. When summer rolls by Ill throw the HKS back on if the temperatures are an issue.

Edited by SargeRX8

Main problem with the Nismo 3" catback is the weight (good mufflers!), it flows pretty well.

You'll notice that the exhaust note wakes up after ~4000rpm so it's still good soundwise.

Performance wise you will take a hit from reducing ID of the exhaust, but shouldn't be to noticeable on your power output.

For reference I had that exhaust on my 32R for 4 years while it was daily driven, was a lucky charm with police I reckon because I never got any grief :)

Any exhaust system thats going to be quiet, is going to weigh a fair bit... that's just how it works.

You could add a better muffler to the 3.5" system if you wanted. That would most certainly help, two = super quiet.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...