Jump to content
SAU Community

Recommended Posts

Hi all,

Just wanting some input on a tyre dilemma- hope this is not traversing ground already specifically covered in other threads

I have 17x9 +15 rims on my r33 gts-t. Weekend car/ track day use.

Currently running Kumho KU31 in 225/45/17 which need replacing.

These are the contenders;

Kumho KU36 in 225/45/17 - $150 ea

Kumho KU36 in 235/45/17 - $200 ish ea

Toyo R1R in 245/40/17 or 255/40/17 - from St George tyres ebay- 2007 build- $180 ea

I am keen on the Toyos in a 255 (will need to do guard work and more camber) but am worried that they are 5 year old tyres!!

I would rather not spend more than $200 per corner.

Opinions? Thoughts? Recommendations?

Thanks :)

Link to comment
https://www.sau.com.au/forums/topic/404795-3-tyre-options-opinions-appreciated/
Share on other sites

i suggest Federal 595 RSR , i use to run Kuhmo KU36 , the federals are at least 1 second a lap faster and have harder sidewalls .

Ring Ken from OTR motorsports he is selling Federals on SAU - 235-45-17 for $190 http://www.skylinesaustralia.com/forums/topic/398987-federal-r-s-r/page__pid__6444608#entry6444608

With the caveat that the RSRs are even softer than KU36 and don't last as long (and the KU36s don't last long at all!!)

Say what?

Never seen anyone saying the RS-R take noticeably more wear than a KU36 - they seem roughly on par.

KUs were a good choice when they were cheaper, these days RS-R for the money would be the better choice.

i had a had a 225/45/17 ku36 on a 9 and it was stretched, only reason i did this was offset was low as was the car and i had clearance issues.

i now run the 225 on a 7", so for your 9" wheel best to go with 235 or wider if it will clear the guards.

can i ask where you get the 225/45/17 ku36 for 150 each?

I just bought a full set of KU39's from tire rack.

Fronts are 225 wide and 99$ each

Rears are 245 wide and 112 each

shipping was 350.

total was 775. pretty good set if you don't want semi's and better than the KU31's that i had before.

locally i got quoted 1156.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...