Jump to content
SAU Community

Recommended Posts

At the moment i'm on 86,000KM on my V35, i was curious if anyone has got their 100 thou service done through Nissan before and how much did it cost you? I'm considering sourcing all the parts i need and only paying for labour but has anyone actually left the entire service for Nissan or someone else to do? Just thought i'd get prepared for the big service although my car seems to be running fine.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/404908-100000-v-service/
Share on other sites

find a reputable mechanic to do it. Nissan will rip you off big time no matter which way you look at it and I doubt they will allow you to supply parts as this will no doubt void any warranty on "their" service.

Yeah figured that Nissans good at doing that aren't they.

what are you expecting to change at the 100k kms service?

Well i've just replaced my belt that controls air con alternator battery etc and clutch/brake fluid so basically anything else that needs doing. I don't have much of an idea as to what needs doing that can be called "major" though.

86,000 K's? I think your odometer may have had it's service already. :P

What do you mean? I bought the car at 80,000 and it hadn't been serviced for a while the guy had pretty much done it himself but i don't know what he's done so i'm iffy about it :/

The 100k is generally a term for cars with CamBELTS (not chains). It was always the old interval to change them. In recent years on newer cars, some manufacturers will go to 150k kms on a cam belt or X years.

Since you don't have a cam belt to change there is really nothing out of the ordinary about a 100k kms service.

When servicing, its a combination of -

Engine oil and filter

Air filter

Brake fluid / bleed

gearbox/transmission oil/ fluid

Differential fluid

Engine coolant

Brake pads and discs as required

interior / cabin air filter

Ancillary belts as required

Spark plugs are 100k km items

in tank Fuel filter

anything else I forgot

If you don't know when last done or have no record then its a good idea to change and record it.

I did mine last week,all fluids and filters, spark plugs, new pads. I bought all the parts before I had the car in, cost me $500 in labour but that's also including installing a plenum spacer lol. My mechanic is also a friend of mine so I don't mind paying a little extra for the peace of mind knowing everything is done the way i want it while chatting with him when he's working on the car. If you car is an Auto you MUST only use OEM Nissan transmission oil (Matic J) and if you are unsure when your trans oil was last serviced I wouldn't recommend flushing it IMO. I'm not too sure on the coolant whether it has to be the OEM antifreeze, but i used that just to make sure...maybe someone can clarify this.

Thanks for that Alex, good to know nothing major needs to be done. I can basically do all of that from my garage.

Kevin, i have a manual but yes that is good for you! too bad there are no reputible mechanics in my town :/

If you car is an Auto you MUST only use OEM Nissan transmission oil (Matic J) and if you are unsure when your trans oil was last serviced I wouldn't recommend flushing it IMO. I'm not too sure on the coolant whether it has to be the OEM antifreeze, but i used that just to make sure...maybe someone can clarify this.

Nulon synthetic trans fluid is fine, just don't use dextron III, it will slip and ruin your clutch plates. Back flushing is a good idea, as is dropping the pan and cleaning the filter if you are keen.

Mixing antifreeze is a bad idea, but who knows what is in your cooling system now... I would flush it a few times with water and drain it completely, (the block drain plug is a pain to get to) then refill with a decent off the shelf coolant.

i've noticed with the auto-trans fluid. i used one of the nulon trans fluids on my previous change after i first took delivery of the car, after that the changes semmed a bit jerky to me. but after replacing it with the matic-j. its alot smoother than its ever been.

mabye its just me. but i'd stick to the genuine nissan stuff.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
×
×
  • Create New...