Jump to content
SAU Community

Recommended Posts

so im looking at buying a set of these achilles 123 semi's. as there a street tire i dont think there really a real semi slick but thats what they call them. so im wondering if anyone has used them and can tell what there like in the dry and wet. there pretty cheap around $220 each. trying to compare them to the rsr and ku36 with a better tread wear.

Dunno about the semi sliks but my mate just replaced a set of Achillies road tyres on his wifes commodore that did less that 5,000kms before they were rooted... I think they are a pretty cheap shitty brand.

I was looking at trying them too... Most I've asked said they are on par with the other two choices... There are drift cars and track cars using them successfully, they are a street tyre like the others and should be fine.... As for the commo wearing them in 5000km, well it's a commo.... :P

I don't know their semi slick at all, but for a cheap tyre I was very impressed with their street tyre's grip. The extra wear Chris was seeing might be related to being softer/better grip than the usual chinese rock-hard tyre that lasts for 1billion klm but has no grip.

Nope, they will be along the lines of the KU36 and RS-R, a real grippy tyre for street.... I assume these will suck in the wet too.... My KU36 have done over 5000kms and are only wearing due to no wheel alignment since suspension work, they have a similar tread wear to the 123s I believe

Don't be fooled into getting these tyres, I have these horseshit tyres on the R33 I just bought, the rears are 275 wide and the car is stock, and I have crap all grip.

I ran smaller 255 KU31s on my old 240rwkW R33 and it provided more grip.

not to mention I have a friend with a mirage using the same tyres and he lights up 3rd gear with ease, well he is running an EVO 5 motor but that's not the point lol

Edited by johnnilicte

Don't be fooled into getting these tyres, I have these horseshit tyres on the R33 I just bought, the rears are 275 wide and the car is stock, and I have crap all grip.

I ran smaller 255 KU31s on my old 240rwkW R33 and it provided more grip.

not to mention I have a friend with a mirage using the same tyres and he lights up 3rd gear with ease, well he is running an EVO 5 motor but that's not the point lol

And yet SimonS14 and a couple of the other drift guys all rave about their grip?

And yet SimonS14 and a couple of the other drift guys all rave about their grip?

it's like someone saying Linglong tyres provide hectic grip, try them out for yourself LOL... yashimash!

Don't be fooled into getting these tyres, I have these horseshit tyres on the R33 I just bought, the rears are 275 wide and the car is stock, and I have crap all grip.

I ran smaller 255 KU31s on my old 240rwkW R33 and it provided more grip.

not to mention I have a friend with a mirage using the same tyres and he lights up 3rd gear with ease, well he is running an EVO 5 motor but that's not the point lol

Are you sure you didnt use the achilles atr sport? because Ive also used the 123 and they are on par with the rsr in terms of grip.

Achilles 123 aren't sold in a 275 tyre as far as I'm aware also... :/

Danny Vahoumis drifts with the Achilles 123 also and it's apparently a pretty decent tyre.

I have 123s on my Evo 8 and I would recommend them to anyone. Great tyre for the price. In the dry they grip better than my toyo r1rs and federal 595 rsr. For the fella that spins 275s like the car is 500 horsepower... Your car suspension would be set up like a pile of sh*t.. That or you're driving in the wet clutch popping every two minutes.

I have 123s on my Evo 8 and I would recommend them to anyone. Great tyre for the price. In the dry they grip better than my toyo r1rs and federal 595 rsr. For the fella that spins 275s like the car is 500 horsepower... Your car suspension would be set up like a pile of sh*t.. That or you're driving in the wet clutch popping every two minutes.

Probably is too, just bought the car and it's running some rubbish pedders comfort shocks & springs, soon to be removed and put on eBay.

As for the clutch popping every two minutes, I'm not 18.

Edited by johnnilicte

Probably is too, just bought the car and it's running some rubbish pedders comfort shocks & springs, soon to be removed and put on eBay.

As for the clutch popping every two minutes, I'm not 18.

Can you confirm you're running 123's? What size are they if you are, cos you're not running 275's.

Can you confirm you're running 123's? What size are they if you are, cos you're not running 275's.

I'll look when I get home, they provide very bad lateral grip I can tell you! The car would come out around corners in a tight roundabout with some gas.

I'll look when I get home, they provide very bad lateral grip I can tell you! The car would come out around corners in a tight roundabout with some gas.

Could be a heap of reasons for that though!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...