Jump to content
SAU Community

Recommended Posts

Hey Guys

So Im doing my 100k service soon , decided on all the parts , read all threads pertaining tot he subject and got alot of advice from the more knowledgeable members on here.

All I basically want to know is , has anyone used these eBay silicon hoses that apparently offer a 12 month warranty?

http://www.ebay.com.au/itm/250919410377?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

My Radiator and coolant hoses are starting to show their age and I wanted to do it while Im doing my 100k service, but the genuine nissan ones are so damn expensive.

Over $100 for 2 hoses on kudo Motorsports website...are you serious!!!??

Il pay the bucks if I have to as I'm not going to skimp on quality , but if i can get the same hoses of similar quality that will do the job for much cheaper then I want to.

If anyone has had experiences when purchasing these hoses , be it good or bad , please post.

Cheers

i bought some red silicone hoses and an alloy rad for my old mini i rebuilt, the hoses where great quality just needed a trim here and there, and the radiator was fantastic quality, however i had to drill the radiator surround, because the attachment holes where bigger on the rad. now i know its a mini (73) not a turbo but, it ran fantastically, hardly got hot enough to work the demister!!!

i bought some red silicone hoses and an alloy rad for my old mini i rebuilt, the hoses where great quality just needed a trim here and there, and the radiator was fantastic quality, however i had to drill the radiator surround, because the attachment holes where bigger on the rad. now i know its a mini (73) not a turbo but, it ran fantastically, hardly got hot enough to work the demister!!!

cheers , people have said i should stay away from "cheap silicon". Would this item be regarded as that? anyone else have any experiences regarding this?

Edited by tripsteady

As far as i can tell from using the odd silicone hose here and there is that they are fine. The only ones i didnt like was the vac hoses. They seemed to go all wierd and powdery on the outside so just went back to good old black hose.

Ebay hoses just fine except they forgot to cut them on the ones under plenum so they looked wonky till ya figured that out, but I bought the 5-7 ply ones not flimsy ones

And kudos 100k kit

Gates belt noisy as hell but after speaking to gates racing it just needs to be tensioned with a warm engine not cold kelvar doesnt stretch well and it just takes a little expansion and noise pops up

Radiator had issues with but its a SAU seller who wasnt the most helpful and now it leaks on the bottom hose dooh , its made in china as well anyhow so why bother

The other hoses i had fail were name branded au brand vacuum hoses - too thin walled

Ebay hoses just fine except they forgot to cut them on the ones under plenum so they looked wonky till ya figured that out, but I bought the 5-7 ply ones not flimsy ones

And kudos 100k kit

Gates belt noisy as hell but after speaking to gates racing it just needs to be tensioned with a warm engine not cold kelvar doesnt stretch well and it just takes a little expansion and noise pops up

Radiator had issues with but its a SAU seller who wasnt the most helpful and now it leaks on the bottom hose dooh , its made in china as well anyhow so why bother

The other hoses i had fail were name branded au brand vacuum hoses - too thin walled

really want to get this timing belt changed...will never forgive myself if it snaps....

As far as i can tell from using the odd silicone hose here and there is that they are fine. The only ones i didnt like was the vac hoses. They seemed to go all wierd and powdery on the outside so just went back to good old black hose.

Cheap silicon hoses leak, and i had an ebay one fail after about 12 months. Back to Nissan OEM now and no problems.

got a fendix radiator for the gtr on ebay. still going well and no heating issues after 6 months

http://www.ebay.com....=item27bef7ff4e

Ebay hoses just fine except they forgot to cut them on the ones under plenum so they looked wonky till ya figured that out, but I bought the 5-7 ply ones not flimsy ones

And kudos 100k kit

Gates belt noisy as hell but after speaking to gates racing it just needs to be tensioned with a warm engine not cold kelvar doesnt stretch well and it just takes a little expansion and noise pops up

Radiator had issues with but its a SAU seller who wasnt the most helpful and now it leaks on the bottom hose dooh , its made in china as well anyhow so why bother

The other hoses i had fail were name branded au brand vacuum hoses - too thin walled

thanks for all the replies guys ,meant radiator hoses and coolant hoses not radiators alone, but I guess my thread title was a bit misleading ...id never buy a radiator or any of the other cheap Chinese crap from ebay..went down that route with the supra before before ...lets just say do it once and do it right.....and u save money time and frustration. Trying to save a few bucks usually ends up in disaster....

Hmm Gates belts are noisey....was going with that with my 100k kit from kudo....dont want it to be noisy though , im sure Paden knows about tensioning them when engine is warm

thanks for the advice guys , im thinking il just go oem - First do my 100k service and accessory belts brake fluid,coolant flush and oil change

and just do all my hoses , diff , transmission , o2 sensor later down the track when ive got a bit more cash...

Edited by tripsteady

I did all my hoses , water , air etc so they could match my colour scheme

The expensive ones from prob one of the best in oz arent any better then good ones made in china ? My failure hose is the name brand stuff , same hose twice now

gates makes oem hoses and racing hoses , that withstand time but can be hard to find

Supercheap sells some ?

Gates makes the GReddy belts as well and a few other branded japanese belts

My radiator is from a local popular SAU seller but it had made in china right on the box , so unless its made onsite its made overseas prob!!

but you know its still better then factory lol crimped alloy and plastic tanks suck

Ahh, nah i dont agree with that. You only think plastic tanks suck because after 10-20 years one of them sprung a leak.

In saying that, i didnt replace my OEM with another OEM. The full alloy chinese ones these days are pretty dam good quality compared to what they used to be.

Ahh, nah i dont agree with that. You only think plastic tanks suck because after 10-20 years one of them sprung a leak.

Actually they're easy to fix with tube of silicone and pliers

But fail from vibration easier , but compared to old radiators made out of brass or copper they leak less

Alloy one now works fine just had fitment issues , that were know years before , and some other issues due to quality looks not how it works

In saying that, i didnt replace my OEM with another OEM. The full alloy chinese ones these days are pretty dam good quality compared to what they used to be.

Even japan imports from china ,indonesia , Philippines lol

Could be worse mexico ??

LOL! Too true.

When my dad was my age he said that the rubbish car parts actually came from Japan. They had an absolutely shithouse name for automotive parts.... things can change :) So i dont see why China cant have stepped up their game too.

Im all for giving them a chance. Hey, if it fails, its my problem. And so far i have done just fine :).

But im picky as to what i actually buy chinese, so i guess i sit on the fence hahah

Edited by gotRICE?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That is surely the biggest gathering of Stageas in North America, ever!
    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...