Jump to content
SAU Community

Recommended Posts

I'm selling my 1993 R32 GTS4. The reason for sale is that I am 33 now and getting soft! I have loved this car but it's time for a change. I live in Harrington Park NSW.

Being an R32 GTS4 it has ATTESSA 4WD and has an RB20DET engine.

I have had the car for about 11 years. When I bought it there were about 32,000km now there are 262,191km. There car runs the original engine and gearbox which have remained strong. Externally the car looks good (as shown in the pictures) and has a great interior.

The car is registered until October 2012.

Over the years I have included a number of non-stock parts which I have listed below.

I can be contacted here or on the phone 0435 844 866.

Thanks,

Ben

There are some some negative elements to the car including

Slight amount of rust behind the driver's rear wheel which I have cut out but not repaired (the cheap option would be to get Type-M rear

quarters which would entirely cover the area

Rust in the driver's side B-pillar following a crash repair from about eight years ago

Needs four new tyres

Needs a new clutch (the car drives fine but the clutch is making a noise which should be addressed)

Non-stock parts

R34 RB25DET Neo OP6 turbo

GTR intercooler

K&N air filter

Bosch VL turbo in-tank fuel pump

3 inch front-pipe back exhaust (cat back is HKS)

Tilbrook Auto and Dyno chip

Apexi AFM (old-style)

Sparco steering and KYB boss kit

Stealth shift light

4WD on/off switch

ECUTalk Consult Cable

Pioneer 5 1/4 inch 3-way front speakers with Phillips tweeters

Pioneer 6 inch 3-way rear speakers

Biltstien shocks

King springs

Nolathane front upper control arm bushes

Front and rear strut bars

Cusco brake stopper

R32 GTR (non-Brembo) 297mm front brakes

Slotted rear brake rotors

Braided brake lines

Genuine N1 boot lip on blanked boot lid

Fibreglass N1-style side skirts

Type-M front bar

Removed items

ABS removed

Air conditioning removed

Rear-wheel steer removed

Stereo head unit removed

Rear windscreen wiper removed

post-28712-0-08679700-1343221931_thumb.jpg post-28712-0-46361400-1343222016_thumb.jpg post-28712-0-33445300-1343222052_thumb.jpg

post-28712-0-18841000-1343222084_thumb.jpg post-28712-0-70993900-1343222121_thumb.jpg post-28712-0-14007100-1343222147_thumb.jpg

Edited by Birth
Link to comment
https://www.sau.com.au/forums/topic/405583-1993-r32-skyline-gts4-3600-sydney/
Share on other sites

how??? wat the fff???? how is this still for sale? 3600 for a turbo registered GTS4 ??? this has to be a joke right?

theres no way......WTF????

FU man y cant you be in adelaide, all the frigin cheap cars are everywhere but adelaide damit !!!

Hmmm okay then:

I charge $15/hour, google says 16 hours so that's: $240, I sleep on my own time.

You pay fuel so, let's assume that it does 9L/100 k's. It's 1400 k's so thats about 125L of fuel at say $1.40/l, that's: $175

You pay to fly me back to Sydney, plus you have to drop me off at the airport, plane ticket, webjet says: $120

So that's $535.

Better to just freight it down.

Hmmm okay then:

I charge $15/hour, google says 16 hours so that's: $240, I sleep on my own time.

You pay fuel so, let's assume that it does 9L/100 k's. It's 1400 k's so thats about 125L of fuel at say $1.40/l, that's: $175

You pay to fly me back to Sydney, plus you have to drop me off at the airport, plane ticket, webjet says: $120

So that's $535.

Better to just freight it down.

lol ya cost the same but we get insurance !

There have been a few enquiries about the condition of the interior. Here are some pictures. I intended on removing the guages before selling the car, but I'm happy to leave them in for an extra $100. They are Automter Pro Comp boost, fuel pressure and oil pressure

post-28712-0-15579700-1343773928_thumb.jpg post-28712-0-15707700-1343773953_thumb.jpg post-28712-0-19923500-1343773974_thumb.jpg post-28712-0-28161500-1343773998_thumb.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...