Jump to content
SAU Community

Recommended Posts

Hi guys, just recently my interior lights wont work when I open the door. It's not fuse related (well I don't think) and not bulb related. Nor is it light fitting related (I swapped rear to front) the rear works great but the front only works if you turn it to the "on" position. The door switches are working and the open door symbol on the dash works when the key is turned and the "key in ignition" bell works when you open the door. I get 12.45vdc at the door and I know it's only switching the ground but I can't buy this one out? Is there a relay or something else controlling interior lights?? Any help on this would be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/406279-interior-light-problems/
Share on other sites

Yes there's a relay and a timer that keeps the lights on after you close the door until you start the engine. Where it is I can't remember but if you find it I may have a spare as I have a binfull of relays I got from an S1 that I wrecked for parts!

btw this is (hopefully) the key to the fusebox behid the coin drawer:

Fusebox001.jpg

Thanks for that i had thought of that. Ill have to try to find it. That is the S1 fuse layout, i have a S2. But thanks for the thought. I already found the S2 one and know its not a fuse. Just need to find that relay..... if anyone knows that would be a great help, and if it is the problem i would like to grab that one from your "bin of stagea spares" lol what else is in that bin out of interest?

:)

Thanks for that i had thought of that. Ill have to try to find it. That is the S1 fuse layout, i have a S2. But thanks for the thought. I already found the S2 one and know its not a fuse. Just need to find that relay..... if anyone knows that would be a great help, and if it is the problem i would like to grab that one from your "bin of stagea spares" lol what else is in that bin out of interest?

:)

Not much TBH - sold all the obvious stuff - just have some odd relays and sensors left.

the dash cluster (speedo etc) has the BCM inside it. that runs the the lights. there is also a smartentrance module next the the fusebox that also drives the lights. this is more for the S1 though.

the dash cluster (speedo etc) has the BCM inside it. that runs the the lights. there is also a smartentrance module next the the fusebox that also drives the lights. this is more for the S1 though.

BCM? I hav the cluster out nothing seams obvious or easily replaced for that matter. What's the control box look like? Black and too the left of fuse box by any chance?

I've got cluster out and appart. Nothing really seams to look like a control unit. Behind the cluster is the PE cell for auto head lights is the timer in there? I'm thinking not. I pulled out the black box next to the fuses , it's the bell for making annoying noises, is it in there? Other wise I'm in struggle town with our a map... :(

Ok. So on top of the fuse box is a white box which wen I pulled pulled out was able to continuity test out the wire from the door switch to its connector. It's a sealed unit with some holes on top (im thinking it has buzzer or something in it.

Not much TBH - sold all the obvious stuff - just have some odd relays and sensors left.

Ok I hav the white TCU (timing control unit) out of the car. I'm pretty sure it's what I need (looked up the part number was all in jap so google translated it) I'll try to put up a pic ( haven't done it before :)

it will say smart entrance on the side of it. they are common with R33 as well. that does the majority of the body stuff. the locks and lights also loop through the cluster. SE module is a possible culprit.

it will say smart entrance on the side of it. they are common with R33 as well. that does the majority of the body stuff. the locks and lights also loop through the cluster. SE module is a possible culprit.

Im not sure mine is the same? are you talking about S1 or S2? Mines S2 and i think it could be different. All the things you describe dont seam to be behind my dash bits? I found the TCU and looked it up on google, got a bunch of stuff in jap and russian but i translated it and it seams to be the part im looking for? It does the key in ignition and reversing tones, it also controls the door locks. Im kinda sure it does the interior light timing and a few other things, but not 100% My fuse box also has some relays on it but when i trace my door switch wires i can only get them back to the TCU....

Can't for the life of me remember which colour the box was, but it had a few wires going in (more than I expected) and covered all the beeping functions including reverse which I was trying to kill. It also seemed to control the remote start for my car.

there may be a few different boxes depending on series and options

Can't for the life of me remember which colour the box was, but it had a few wires going in (more than I expected) and covered all the beeping functions including reverse which I was trying to kill. It also seemed to control the remote start for my car.

there may be a few different boxes depending on series and options

Yes mines the same. It's white and has a small metal bracket on the side to bolt it in place above the fuse box. It does all the tones and locks etc and I'm pretty sure it does lights. Does any one know where I can get a new one from? Remote start sounds cool if I can get one with this :)

Ok so decided to give up on the control box. Too expensive and hard to find to care. So what I did (which was my original plan) was to hook up under dash and rear seat foot well lighting and do away with the control box and timer etc. If you have this problem and need it fixed the control box replacement will fix it. But in the process of doing my foot well lights I got rid of the annoying beeping, HOWEVER! It also gets rid of the "head lights on" tone and this could result in some flat battery's! Just remember to turn your lights off :) Ill put pics up of my lights tomorrow :)

  • Like 1
  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...