Jump to content
SAU Community

Recommended Posts

Bear in mind it is a bit of a mission to do this at home as you will almost certainly need to take off the hub assembly to press out the existing ball joint bush.

You dont need to take off the hub to press bearings out, simple tool can do it on the car, even if you do need to take hub off its easy to get off no mission lol.

i have one these kits sitting at home waiting to be installed.. i wanna do this at home but my concern is finishing the job over the weekend as i have read its a pain to press out the balljoints

boostn0199: what did u use for the job? how long does it typically take?

ps - i have a small dremel which i was thinking of using to cut of the lip on the balljoint and press it out from that direction - anyone done it this way?

Edited by BWRGTR

Modification of a steering system. Not permissable without engineering.

Hope mine is hard to see under the rear diffuser... Pretty sure they will have a field day with the Decat pipe. Is my fuel system illegal 2?

Under Car, New Exhaust and Fuel System

Edited by RB 30

Take my tip. If it is still in whatever garish colour it came in, take it off and paint it black before crossing your fingers. Will make it much less likely to get spotted. Cops may or may not be bright enough to know whether the car was supposed to have HICAS, but they can sure as f**k tell that a bright orange/blue/red component is not original.

Take my tip. If it is still in whatever garish colour it came in, take it off and paint it black before crossing your fingers. Will make it much less likely to get spotted. Cops may or may not be bright enough to know whether the car was supposed to have HICAS, but they can sure as f**k tell that a bright orange/blue/red component is not original.

True that! I still have a airbox! and a cat some times lol

i have one these kits sitting at home waiting to be installed.. i wanna do this at home but my concern is finishing the job over the weekend as i have read its a pain to press out the balljoints

boostn0199: what did u use for the job? how long does it typically take?

ps - i have a small dremel which i was thinking of using to cut of the lip on the balljoint and press it out from that direction - anyone done it this way?

Basically i made up a mini ball joint puller and pusher so it pushes witha bolt to get it out. For me even if i did it with removings hubs wouldnt take memore than couple of hours.

  • 3 months later...
  • 1 month later...

Do ppl who put these lock out kits in, only do it to improve track performance, or do ppl experience issues with the HICAS on everyday road use?

I've never tracked my car, but I do know that when I engage HICAS on the road, I can take corners up to 20 km/h faster then when it is disengaged.

So just curious as to why do many ppl install lock out kits? I personally think HICAS is excellent, but like I said, never tracked my 34.

Edited by AshR34GTT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Congrats on the career change!  I did something similar at the start of the year too, left IT / corporate after nearly 2 decades. Soooo when's the motor coming out for the spark plug change?
    • Hi guys, long time no post as per usual! It's been a busy year so far, the biggest thing being a new job.  After 28 years in the automotive industry I decided it was time for a change.  I was losing faith in the industry and where it's heading.  Now in a completely different industry (electrical) working for a company that manufacture water pump contollers.  Not as sexy as cars but it's an interesting,  challenging industry. I now don't work Saturdays which is a bonus!  It's still 50-55 hours a week but having Saturdays ack after 28 years of working them is awesome!   No news on the GT-R but i did decide to add some more JDM goodness into my life....           1990 300 ZX.  She's not perfect but for a 35 year old car she ain't bad!  Just going to tidy it up a bit and enjoy it.  It's currently auto but will start stockpiling everything for a manual swap. It WILL distract me even further from the GT-R but im hoping not for too long! It somewhat proves a 6'8" freak can fit in a 300 ZX.  Sort of...  I drove it home from the previous owners house in Melbourne via Black Spur and Merton Gap (2 awesome bits of Victorian twisty road) and it was amazing!  Handles so well!!!   I don't think it would be worthy of a full build page but I'll post up some of the upgrades here if anyone is interested?  Cheers guys!
    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
    • Cracked deck  And other cam snap stuff   
×
×
  • Create New...