Jump to content
SAU Community

Recommended Posts

Osiris is good for whatever you can get a AFM to read. Has been used on cars with over 1000hp (USA)

With an AFM upgrade it will do everything that the HKS kit will do on a std motor. Without boost control, you dont even need to upgrade the stock AFM.

Also HKS FCon is available.

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

got most shit sorted plugs etc.

thinking about using royal purple oil and filter. its not cheap but is it worth it?

also turbo timer HKS or Apexi?

any recoms on electronic boost controller?

what about deleting the cat?

cheers :no:

Go Motul 300v or NEO. Both are better than RP.

No turbo timer - not required. Just drive comfortably for the last block or two before you get to your destination

EBC - HKS EVC, Blitz IBC or Greddy Profec B.

Why delete the cat? Just get a high flowing cat. If it is the HKS turbo kit, leave the cat as is.

Definitely aim to keep some kind of catalytic converter in the vehicle to at least keep it street legal. There's no point in having a nice performance car if it gets taken off the road for failing emissions tests in random inspections. It's way more hassle than its worth.

got most shit sorted plugs etc.

thinking about using royal purple oil and filter. its not cheap but is it worth it?

also turbo timer HKS or Apexi?

any recoms on electronic boost controller?

what about deleting the cat?

cheers :no:

Cheers, then shakes head no? *confused*

anyway- what injectors are you using? Did you get a real ECU solution?

Royal Purple is fine, its in my car atm, but as iamhe said - there are better oils again. Buy filters from nissan

As has been said- no need for turbo timer, your expert friend should know that. turbo is oil and water cooled and as long as you dont flog it and turn it off right away will be fine.

Use a simple manual boost controller, unless you like spending 4-600 on something fancy. It'll do the job, but you'll just lose 1.5psi in the top range. nothing bad.

Kit comes with a high flow HKS cat unless you didn't get it. Suggest you use it.

if u get the utec hen it comes with optional boost controller and u cna program 5 different maps and change with press of a button..

As for oil, go on g35 driver and search, for FI most use Mobil 1 or Shell Rotella Syn T

RP is expensive and doesnt like our engines...

If you have a mongoose alarm most have turbo timer func built in you can program. If not then dont worry about it, just drive it slow before you get home and let it cool down..

cheers for the help guys,i know i dont need the t/t but was trying to be cautious.

undecided about ecu got a couple of weeks to sort it out before install

surprised to hear that about royal purple my mates swear by it but then again they drive commodores lol

  • 2 weeks later...

also im missing one of the centre caps from my LMGT4 rims they are two piece with the outer one a threaded plastic cap you can see them in the picture. Any idea where i can buy one or is it easier just to buy a new set in a different style? cheers

exhaust manifolds and front end off, new manifolds and turbo on!

the bloody heat shields were the biggest pain took an hour to get each one off!!!

only a bees dick of room for the turbo didnt think it would fit for a mo!

intercooler next :yes:

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...