Jump to content
SAU Community

Recommended Posts

Been looking on ebay but some dont look strong.

Im especially just interested in a rear set for now.

Plenty of ones like a horse shoe like this shape (

But seen a few like a double horse shoe shape like this ()

they look alot stronger?.

any links?

Link to comment
https://www.sau.com.au/forums/topic/407347-best-bang-for-buck-r33-camber-kit/
Share on other sites

Richo do you know if Cusco are better and stronger then GKtech??

Its pretty hard to tell you if one is stronger thsn the other unless someone does destructive testing on them. Personally i think strength wise there wouldnt be difference its prob it anything quality of the rose joints, cusco ones will probably last longer.

Ask yourself: what do you want them for,

if you're going to drive lots of kays on street maybe stay away from rose/pillow jointed arms - (believe defectable).

if it's for motorsport, ask them how would you source replacement parts - eg new pillow balls.

if it's for bling, get a nice looking set, blue titanium anyone.

As for strength of the various arms, ask yourself, would you put your companys name on something you knew would fall - if they name it, they should stand by it or they'd go bust.

Should have added, I'm looking for a motorsport set myself.

If you want bang for your buck, surely you can’t go past the SAU trader mentioned, me, I’m also considering a certain fabricator from SA, who uses imperial fittings so he can source decent race spec joints cheaply (as the States is imperial).

Its not that they will brake or bend. More how quickly will the flog out and how hard will the be to adjust and align.

Also we are talking front upper arms here the S chassis doesn't need then, as the strut controls that.

For thr rear arm, hardrace with the polly bush for a street / track car. Much better than a rose joint that will flog out in no time on the road to and from the track.

Jon these are the one http://justjap.com/store/product.php?productid=20359

I wouldnt consider anything else.

The cusco does not use rose joints, its polly bushed. I got mine second hand from japan for $300 and 40 track days later and one crashed car. They are still fine.

Rose joints last f**king ages, don't listen to this rubbish. Its not uncommon to buy cheap old cusco pillow ball arms from the import wreckers that have been on a car for years and years in japan, and there is nothing wrong with them. Rubber or poly bushes are shit, it's more likely that the poly will flog out quicker than a pillow ball. That said, cheap chinese pillow balls will indeed flog out much quicker. Thats really the only problem with cheap china shit, that and the fact you have to tell people you have cheap chinese arms.

Edited by OEM_as_f*ck

I don't run a motorsport company, just have my personal experience to go from but maybe you'll want to add Taiwanese to your Chinese pillow ball crap list.

Get clunks from left side of the car, so when I got my alignment done I asked them to give the suspension the once over - result, all connections tight, clunk is coming from pillow ball slop. The suspension has been in for 1yr, 12 driven to track days and <10,000km. Is that f**king ages?

John, just looking at improving my rear setup, front already has coilover struts with camber tops and adjustable castor rods.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...