Jump to content
SAU Community

Recommended Posts

Cheers. That's what I squatted at States earlier in the year (with wraps). I should squat around 230kg on Saturday which is a decent improvement seeing as I sat out for a few months with a bulged disk in my back.

I'll take 225kg on my second and depending on how it moves I may go for more than 230kg.

FULL RESULTS ProRawFive

80kg class

1. Greg Fraser - 79.6kg - 265/140/265 - 670kg

2. Les Grills - 74kg - 220/155/250 - 625kg

3. Allen Ozdil - 78.6kg - 225/135/250 - 610kg

4. Jason Chieng - 73.6kg - 215/130/235 - 580kg

5. Eddy Hady Darg - 79.2kg - 200/110/260 - 570kg

95kg class

1. Martin Nguyen - 93.2kg -300/175/320 - 795kg

2. Jesse Burrows - 95kg - 305/175/285 - 765kg

3. Joel 'Beeker' McCaughan - 93.8kg - 285/182.5/270 - 737.5kg

4. Adam Lam - 94.3kg - 245/142.5/240 - 627.5kg

110kg class

1. Daniel Green - 109kg - 385/237.5/380 - 1002.5kg

2. Jackson Murrie - 107.6kg - 350/195/310 - 855kg

3. Albert Ozdil - 106.6kg - 302.5/180/302.5 - 785kg

4. Conor Zyskowski - 98.9kg - 260/135/265 - 660kg

5. Lee Gamble - 98.6kg - 245/120/260 - 625kg

6. Nick Haralambopoulos - 106.5kg - 240/135/250 - 625kg

110kg+ class

1. Brandon Lilly - 149.4kg - 345/265/347.5 - 957.5kg

2. Luke Poli - 139.6kg - 330/215/310 - 855kg

3. Jack Pollard - 155.1kg - 317.5/205/320 - 842.5kg

4. Zachary Turner - 155.2kg - 350/220/270 - 840kg

5. Adam Mazzon - 123.6kg - 275/170/335 - 780kg

6. Daniel America 126.2kg - 285/185/300 - 770kg

7. Zoran Jankovski - 114.3kg - 280/160/285 - 725kg

Womens Results - Glossbrenner points

1. 466.82 - Iryna Piatrovich - [email protected]

2. 406.02 - Yolandie Weir - [email protected]

3. 369.03 - Heidi Stewart - [email protected]

4. 359.32 - Sussy Kollen - [email protected]

5. 354.27 - Alana Andrews - [email protected]

6. 353.68 - Rebecca Gleich - [email protected]

7. 347.42 - Jessica Lilly - [email protected]

8. 340.46 - Joanne Greagen - [email protected]

9. 336.46 - Melissa Knight - [email protected]

10. 329.45 - Vicki Jewson - [email protected]

11. 310.76 - Frances Fitzpatrick - [email protected]

Martin was set for 800kg, but then he missed his opening bench. Powerlifting is about winning, not PB's etc. Max erred on the side of caution because Jesse Burrows out squatted Martin. If Max had gone up to the planned 175kg second, and Marty missed it, he could have bombed. So 795kg it was, a 107.5kg PB from Nats.

If you guys remember, his total went up 2.5kg from States to Nats, so he decided to have Max coach him. Check out Marty's old squat and dead videos, check the difference in technique. Up until Nats Marty trained himself, now he wont wipe his ass unless Max tells him to.

Marty is going to lift in the 100's next year

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...