Jump to content
SAU Community

Recommended Posts

Cheers. That's what I squatted at States earlier in the year (with wraps). I should squat around 230kg on Saturday which is a decent improvement seeing as I sat out for a few months with a bulged disk in my back.

I'll take 225kg on my second and depending on how it moves I may go for more than 230kg.

FULL RESULTS ProRawFive

80kg class

1. Greg Fraser - 79.6kg - 265/140/265 - 670kg

2. Les Grills - 74kg - 220/155/250 - 625kg

3. Allen Ozdil - 78.6kg - 225/135/250 - 610kg

4. Jason Chieng - 73.6kg - 215/130/235 - 580kg

5. Eddy Hady Darg - 79.2kg - 200/110/260 - 570kg

95kg class

1. Martin Nguyen - 93.2kg -300/175/320 - 795kg

2. Jesse Burrows - 95kg - 305/175/285 - 765kg

3. Joel 'Beeker' McCaughan - 93.8kg - 285/182.5/270 - 737.5kg

4. Adam Lam - 94.3kg - 245/142.5/240 - 627.5kg

110kg class

1. Daniel Green - 109kg - 385/237.5/380 - 1002.5kg

2. Jackson Murrie - 107.6kg - 350/195/310 - 855kg

3. Albert Ozdil - 106.6kg - 302.5/180/302.5 - 785kg

4. Conor Zyskowski - 98.9kg - 260/135/265 - 660kg

5. Lee Gamble - 98.6kg - 245/120/260 - 625kg

6. Nick Haralambopoulos - 106.5kg - 240/135/250 - 625kg

110kg+ class

1. Brandon Lilly - 149.4kg - 345/265/347.5 - 957.5kg

2. Luke Poli - 139.6kg - 330/215/310 - 855kg

3. Jack Pollard - 155.1kg - 317.5/205/320 - 842.5kg

4. Zachary Turner - 155.2kg - 350/220/270 - 840kg

5. Adam Mazzon - 123.6kg - 275/170/335 - 780kg

6. Daniel America 126.2kg - 285/185/300 - 770kg

7. Zoran Jankovski - 114.3kg - 280/160/285 - 725kg

Womens Results - Glossbrenner points

1. 466.82 - Iryna Piatrovich - [email protected]

2. 406.02 - Yolandie Weir - [email protected]

3. 369.03 - Heidi Stewart - [email protected]

4. 359.32 - Sussy Kollen - [email protected]

5. 354.27 - Alana Andrews - [email protected]

6. 353.68 - Rebecca Gleich - [email protected]

7. 347.42 - Jessica Lilly - [email protected]

8. 340.46 - Joanne Greagen - [email protected]

9. 336.46 - Melissa Knight - [email protected]

10. 329.45 - Vicki Jewson - [email protected]

11. 310.76 - Frances Fitzpatrick - [email protected]

Martin was set for 800kg, but then he missed his opening bench. Powerlifting is about winning, not PB's etc. Max erred on the side of caution because Jesse Burrows out squatted Martin. If Max had gone up to the planned 175kg second, and Marty missed it, he could have bombed. So 795kg it was, a 107.5kg PB from Nats.

If you guys remember, his total went up 2.5kg from States to Nats, so he decided to have Max coach him. Check out Marty's old squat and dead videos, check the difference in technique. Up until Nats Marty trained himself, now he wont wipe his ass unless Max tells him to.

Marty is going to lift in the 100's next year

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
×
×
  • Create New...