Jump to content
SAU Community

Cold Cranking Procedure For V36

The Max
 Share

Recommended Posts

The Max Mentor

The Max

Posted
Posted

Hey guys,

Just doing my homework here but having my V36 sitting in the garage for the past 5 months and never started, I need to figure out the cold cranking procedure for these vehicles. It's a ritual I used to do with my old Maxima whenever I got back home from such a long absence, changing the oil and filter as well as taking out the spark plugs and dripping some oil down the cylinders and then finally cold cranking the engine without fuel for about 30 seconds, or until sufficient oil pressure would build up.

Of course, back in the day with an old '92 model car, that was a piece of cake with the old ignition barrel but now it's a push-to-start system so it's trickier.

Is there an elegant way to do this or will the ECU freak out and avoid powering the starter motor if I were to remove the fuse for the fuel pump? Otherwise, my other option will be to manually actuate the starter motor using external wiring at the IPDM in the engine bay instead.

Link to comment
https://www.sau.com.au/forums/topic/407732-cold-cranking-procedure-for-v36/
Share on other sites
PN-Mad Grand Master

PN-Mad

Posted
Posted

There is an "elegant" solution, in either getting diagnostic software (uprev) or buying Consult (14,000) and using that to turn off the fuel pump and release fuel pressure when the car is cranked. However, as the others have suggested; just start the car mate. Its not a EH Holden...

Plus cranking it will kill your starter prematurely.

The Max Mentor

The Max

Posted
  • Author
Posted (edited)

Excellent. I have both the Osiris Tuner as well as a Nissan Consult 3+ kit ($1600 Chinese knock-off with software). I'll do my homework when I fly back home soon.

As for killing the starter motor, it's easier to replace one of those than it is to freshen up an engine. I can live with that. My Maxima lasted for 16 years before the starter needed replacing and that was after a course of 4 cold crankings over 8 years.

The VG was better for it.

Edited by The Max
PN-Mad Grand Master

PN-Mad

Posted
Posted

when you turn on the ignition (to connect to the ECU), the pump will prime and pressurise the system. Using Cipher, turn the fuel pump off. Car will start briefly, but run out of fuel and die quickly. Then I guess you can crank if you want. I guess other options would be to disconnect your fuel pump via either the fuel lines, or the electric power to the pump. Might throw a CEL then.

But I'm still of the just Start the car camp... :)

sonicii Veteran

sonicii

Posted
Posted

Agree with the others.. Don't think cold cranking is necessary. Never did this in my old maxima after extended periods of inactivity. Never had any issues with it. It didn't burn any oil and ran great until a broken crank snout shot it dead at 290,000km.

t5iv Grand Master

t5iv

Posted
Posted

Not a fan of cold crankIng. As long as the fluids are in relatively food condition, I wouldnt bother. Just be gentle until everything starts flowing like it should. Then you can really give it to her.

Does that sound sexual? :/

The Max Mentor

The Max

Posted
  • Author
Posted

Heheh. Not really that sexual considering my car is a bloke for if it were a female, I'd be more of a gentleman with it. :P

Anyway, thanks for all the tips guys. I'm not going to start a debate about the pros and cons of cold cranking, as that wasn't the aim of this thread, but at least now I know what I can do to perform it. I'll have to get my hands on the manuals for the Consult 3+ software to gain a little more insight before I get back home.

Thanks again guys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R33 GTR running -9 with no tune

      By Duncan · Posted

      Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Duncan
      Coolant leak?

      By Duncan · Posted

      Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Is it alright to top up with just another green coolant?
×
×
  • Create New...