Jump to content
SAU Community

Recommended Posts

Ok some quick questions

This is all i know about the N1:

"ALL N1 VEHICLES HAVE STRONGER BLOCK, STRONGER CONRODS, STRONGER PISTONS, LARGER STEEL WHEEL TURBOCHARGERS, NO AIR CONDITIONING, LARGE OIL COOLER, DIFFERENT WATER PUMP, DIFFERENT OIL PUMP, QUICK RATIO STEERING RACK, AND NUMEROUS OTHER SMALL CHANGES"

Also they didn't come with a radio or air con (???)

How much would they be worth over here and is there anything else different about them?

Link to comment
https://www.sau.com.au/forums/topic/40834-gtr-r33-v-spec-n1s/
Share on other sites

The block, conrods and pistons are meant to be stronger but there is no evidence that indicates it is the case. The block number is different to that of any other rb26. The turbos are the same size but have steel wheels.

Larger oil cooler - this is not true since a normal gtr doesn't have a oil cooler at all however there is a huge nismo oil cooler. The suspension is also apparently slightly tweeked so the ride is a little firmer.

No radio thus no antenna, no air con, less sound deadening, no rear windscreen wiper, no vanity mirror, carbon fibre rear wing and front carbon fibre undertray etc.

They were only released in white.

IMO they should be around a $15-20k premium over a normal V-spec, that is if u can find one.

that is if u can find one.

:( - good stinking luck finding one, you'd be better off trying to find an R34 GTR N1.

Its a pure track car, so only necesities, hence the no air con, radio etc...

Christian

Ive been looking for a V-spec at the japanese auctions for ages and managed to get a white N1 yesterday with 80000 on the clock, probably land it for around the 36G mark.  Ended up going fairly cheap, now just going to have to put the air con in!

Who is doing the compliance in WA for it and why would you buy an N1 and THEN put the aircon back in.

Think you might find that's a bigger job than you think as I would suggest the wiring isn't even in the harness.

Paul Rogers ( ex Wildcats ) had an N1 but sold it to a local guy over here. It was at Barbagallos and they were asking around 60K but that was a few years ago.

cheers

Ken

You wont need aircon in Canberra... at a guess id say the current temperature is well under 15 degrees :( and in summer it doesnt get overly hot, and if it does, just wind your window down :)

If you want the car to have aircon, why not just go for a R33 GTR V-spec? Its no N1, and you wont have a swish build plate, but you will have a car better suited for daily driving (which is the impression that rubs off on me if you need aircon)

But thats just my $0.02 ;)

Im interested in other peoples opinions so thanks guys, this car will rarely be my daily driver, more like a weekend car, basically i want it to have all the good things interior and exterior.

Yeah i could have bought a V-spec but this is a rarer car that has better go fast stuff (and also i got it cheaper than id been bidding on normal V-specs), ive got more money to play with if things go wrong or i dont like how something is set up.

Knore, not sure if it was overly raced or even at all as most of the other stuff on it was fairly standard - im sure i'll find out, if im too worried i'll just get an ASWN warranty.

Which brings me to my next question, if its been raced what stuff would normally be the first to go, given the internals have been somewhat strengthened?

Only reason i said that is because if something does break and requires an actuall N1 Vspec part then look out for the prices!!

Try and get it atleast dynod so you can see the power and air fuel ratios etc

I honestly wouldnt be buying this unless i was certain

hmm, just my opinion and its probably been said before.

but why pay the extra $20K or something to get an N1?

when u could get a V spec and with that $20K spend it on bettering a N1?

particularly if you are not going to race it?

like for a few $$$ you could upgrade to aftermarket turbos, fit an exhaust if it doesn't already have one, intercooler etc etc.. you could get those Volk TE37s that you wanted but cos you forked out all that more for the car and couldn't afford

and i am sure if you really want there is copies of the carbon under trays/ diffusers

or better yet you could put that $20K as a deposit down on a house

Well im getting it over here for only 36G!  Thats everything, stamp duty, tyres the lot, so theres a risk its been flogged but hey money fixes most things

I agree - for that money, it is worth getting! who here would knock back an actual N1 at that money?!?!?

Burto, if you end up getting it and come to Canberra, get the air con!! Nik, don't you remember how hot is was last summer!!! I would not have a car without fridgeability...

I imagine you can get the N1 complied the same as a standard R33 GTR.

sounds like a good price, congratulations, although, unlike what someone else said, i you will find that the N1 turbos are larger than the standard ones, they come on boost approx 500-800rpm later than the stock ones, making them similar to hks 2530's.

I know this for sure (im not just repeating something ive read on the forum) as i just rode in a friends car who recently fitted N1s.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...