Jump to content
SAU Community

Recommended Posts

Hi!

My Stagea 260RS is currently mapped to 575hp (497awhp), the guy who tunes my car told me to not go higher than 1.4 bars of pressure with my GT2530 turbos when running a stock bottom.

If I don't recall wrong, I've seen people here with ~600hp on stock bottoms.

A friend drove his R32 GTR for 80 000 kilometers with 560hp and a rev limit set to 8500 on a stock bottom RB26 over a 5 year period, the oil pump gears finally broke due to usage of launch for 2 summers.

How much boost/hp is safe?

Thanks

Mattias@Sweden

Link to comment
https://www.sau.com.au/forums/topic/408940-maximum-power-on-stock-rb26-bottom/
Share on other sites

Hi!

My Stagea 260RS is currently mapped to 575hp (497awhp), the guy who tunes my car told me to not go higher than 1.4 bars of pressure with my GT2530 turbos when running a stock bottom.

If I don't recall wrong, I've seen people here with ~600hp on stock bottoms.

A friend drove his R32 GTR for 80 000 kilometers with 560hp and a rev limit set to 8500 on a stock bottom RB26 over a 5 year period, the oil pump gears finally broke due to usage of launch for 2 summers.

How much boost/hp is safe?

Thanks

Mattias@Sweden

Do you trust your tuner?

Is this on E85 or 98 octane?

Mines making around 465rwhp stock bottom end for around 10'000kms so far on 98

No issues, compression still at 160psi each pot, done 2 drag days with another coming soon, on around 21psi

But I trust my tuner 100% and I'm prepared to rebuild "when" the engine has enough

Their is no magical limit depends on alot of variables like tune/condition of engine/fuel/ max revs etc etc

  • Like 1

If I don't recall wrong, I've seen people here with ~600hp on stock bottoms.

A friend drove his R32 GTR for 80 000 kilometers with 560hp and a rev limit set to 8500 on a stock bottom RB26 over a 5 year period, the oil pump gears finally broke due to usage of launch for 2 summers.

How much boost/hp is safe?

How long is a piece of string?

Depending on age, use, condition, servicing, fuel - and anything else you can think of - will depend on how long it will last.

Will it last forever? Highly unlikely. Have seen people with only 450rwhp end up having to rebuild after 2-3 years of circuit racing as the motors just started to breathe heavy. So not blown, and not tune related, just age and use.

If you can't/don't want to rebuild, then don't chase the power. It's as simple as that really.

  • Like 1

How long is a piece of string?

Depending on age, use, condition, servicing, fuel - and anything else you can think of - will depend on how long it will last.

Will it last forever? Highly unlikely. Have seen people with only 450rwhp end up having to rebuild after 2-3 years of circuit racing as the motors just started to breathe heavy. So not blown, and not tune related, just age and use.

If you can't/don't want to rebuild, then don't chase the power. It's as simple as that really.

thats very true.

+1 how long is a piece of string. Have seen plenty of blown RB26s that were still in mostly factory trim (stock turbos, stock tune, etc).

I personally wouldnt put 600whp through one and expect it to last very long at all. My personal feeling for a limit on these things is 500whp, and I'd put a very forgiving 30,000 km life on it at most (street driving with some fun here and there). Some people will have seen more, most would have seen less. Thats just my opinion from reading countless posts and knowing people who have built such setups.

Think also the main things are to keep oil temps under control with an aftermarket oil cooler

Run good quality engine oil (ester base 100% synthetic)

Keep intake temps down (turbos not at their limit pushing hot inefficient air down its throat)

Keep the rev limit sane (eg under 8000rpm)

Then you might have half a chance of it lasting abit longer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Physically, you'd expect it to turn the motor 11/8ths faster than a standard one, but I'm not sure of specifics
    • Ironically the GTT was quite reliable in the 7 years of ownership. From memory I've only had to replace a radiator and coilpacks out of inconvenience 
    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
×
×
  • Create New...