Jump to content
SAU Community

Recommended Posts

I know there are a few knowledgable persons here who would know the answer to this

Police are seeking a formal statement from someone I know about an incident that happened many months ago. They do not want to make a statement as the persons named are scary muthas who will f**k your shit up big time and already have to other people who have spoken to police

Police are saying things like " if you don't make a statement a warrant will be issued for your arrest and you will be charged"

What I want to know is are the cops right and can you be charged OR are you well within your rights to refuse?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/409715-police-statement/
Share on other sites

go in and the statemant is "i don't know i am sorry i can't help" "sorry i don't know" " I don't know" to all questions can't charge you if you don't know,they would have to prove you know and if you don't know you can not be proven to know.all he should stick to the hole time is "i don't know"

the less you say the better

Edited by WARLORD

As in e was a witness and doesn't want to make a statement?

Well within his rights to not make a formal statement.

If he won't give information up he can be done for hindering a police investigation. But if he's told them info they wrote it in their lil notebook, all sweet.

go in and the statemant is "i don't know i am sorry i can't help" "sorry i don't know" " I don't know" to all questions can't charge you if you don't know,they would have to prove you know and if you don't know you can not be proven to know.all he should stick to the hole time is "i don't know"

Lying about not knowing can get you in trouble too, i'd be more inclined to say "no comment". But since this sounds like a serious matter, OP's mate should get a lawyer.

Hey Martin, not sure who you mean but probably good to get them to do what they gotta do and get protected..... But please also stay out of it man, don't want anything happening to you :/ wanna see you trolley surfing for years to come ;)

Legalaid specifies you are within your right to NOT give a statement, and there are very limited circumstances you must answer police questions. (one such time is at the scene of a motor vehicle accident)

It also specifies before answering any questions or making a statement you should seek legal aid.

Secondly if a police officer threatens you to make a statement, said statement is null and void. A statement must be made voluntarily.

Police are saying things like " if you don't make a statement a warrant will be issued for your arrest and you will be charged"

If the police say the above, your friend can exercise the option of saying, "I decline to be interviewed or to make a statement" - and do NOT enter the Interview Room

...in which case the police either have to let him go OR charge him.

If he's charged, he should seek a solicitor as Adam and Matt have rightly suggested above

There is a hotline you can call for free legal advice, look it up.

Better than asking questions on SAU where well meaning novices will give you advice based on what they've heard, like this:

AFAIK the only way you can be forced you to submit a statement is at some sort of inquest, or if you are a suspected bikie (love the new laws Barry ;) )

Edited by Berk

I generally shy away from giving advice on an open forum, however;

If the OP's friend witnessed a serious criminal offence and has 'material' information that the police are not aware of, and he/she refuses to tell them, he/she can be charged with concealing a serious offence.

I would suggest that your friend contact a solicitor before saying anything to police. I am a criminal defence specialist and more than happy to provide advice to your friend if required. PM me for my number if you wish.

The 'right to silence' as referred to by others above does not necessarily apply to witnesses.

Cheers

Chris

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...