Jump to content
SAU Community

Recommended Posts

Hi Martin, I got my entry in and made payment for option 1, but when I went to put my entry number on my online banking description, I realised I had lost the SAU page somehow .

I then just put my full name in the payment description. Is there anyway to fix this or will you be able to identify my payment ok? PM me if you want any other details, sorry for the mishap!

Link to comment
https://www.sau.com.au/forums/topic/409757-sau-nats-2012/#findComment-6542924
Share on other sites

no idea as sau vic not running event

that said Ash will most likely work it out, and if the rest of your details ok they should match it up

so the big thing is.

sau vic took home most of the prizes last year..who helping to bring them back again

Link to comment
https://www.sau.com.au/forums/topic/409757-sau-nats-2012/#findComment-6542933
Share on other sites

Hi Martin, I got my entry in and made payment for option 1, but when I went to put my entry number on my online banking description, I realised I had lost the SAU page somehow .

I then just put my full name in the payment description. Is there anyway to fix this or will you be able to identify my payment ok? PM me if you want any other details, sorry for the mishap!

dont stress - easily worked out :)

Link to comment
https://www.sau.com.au/forums/topic/409757-sau-nats-2012/#findComment-6543344
Share on other sites

I'll do what i can! Those NSW silvias are going to be hard to beat though! SXDS15 and S14, Hawkins in JET200 and it's their home track. Having said that I should be able to keep them honest!

if it makes it easier I volunteer to steal SXD's aero from the s14...just to help you out really

Link to comment
https://www.sau.com.au/forums/topic/409757-sau-nats-2012/#findComment-6543510
Share on other sites

  • 1 month later...

All moved to the Nats area, plus drive ups.

ON a plus Note I'm donating this to the vic ppl at the alpine hotel for thurs night drinks

23782.jpg

GLENLIVET Master Distillers Reserve Malt Whisky 1 Litre

gotta love duty free prices.

byo glass and ice

Link to comment
https://www.sau.com.au/forums/topic/409757-sau-nats-2012/#findComment-6623104
Share on other sites

Just a FYI having come up today with a mate there are a few points to note.

1. The Gundagai BP (Dog on a box) is CLOSED. This is my usual fill point so assuming a few of you will be planning on that also. So to get around this - get off @ the South Gundagai Exit (the first one of the Gundagai exists), and take a RIGHT from the off ramp. There is a Shell and a HJ's/McD's there rather than BP but that's how it goes.

2. There is a TONNE of roadwork. It took us significantly longer than usual to get up. So minimise your stop time at servo's if you can/fill up quickly etc. There was varying works from 40km/h to 80km/r in a fair few sections, much more than when i came up 2 months ago.

3. Few TMU's out, usual story there :)

Link to comment
https://www.sau.com.au/forums/topic/409757-sau-nats-2012/#findComment-6625013
Share on other sites

Just a FYI having come up today with a mate there are a few points to note.

1. The Gundagai BP (Dog on a box) is CLOSED. This is my usual fill point so assuming a few of you will be planning on that also. So to get around this - get off @ the South Gundagai Exit (the first one of the Gundagai exists), and take a RIGHT from the off ramp. There is a Shell and a HJ's/McD's there rather than BP but that's how it goes.

2. There is a TONNE of roadwork. It took us significantly longer than usual to get up. So minimise your stop time at servo's if you can/fill up quickly etc. There was varying works from 40km/h to 80km/r in a fair few sections, much more than when i came up 2 months ago.

3. Few TMU's out, usual story there :)

Thanks for the heads up Ash

Link to comment
https://www.sau.com.au/forums/topic/409757-sau-nats-2012/#findComment-6625256
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers)
    • One other thing to mention from my car before we reassemble and refill. Per that earlier diagram,   There should be 2x B length (40mm) and 6x C length (54mm). So I had incorrectly removed one extra bolt, which I assume was 40mm, but even so I have 4x B and 5x C.  Either, the factory made an assembly error (very unlikely), or someone had been in there before me. I vote for the latter because the TCM part number doesn't match my build date, I suspect the TCM was changed under warranty. This indeed led to much unbolting, rebolting, checking, measuring and swearing under the car.... In the end I left out 1x B bolt and put in a 54mm M6 bolt I already had to make sure it was all correct
    • A couple of notes about the TCM. Firstly, it is integrated into the valve body. If you need to replace the TCM for any reason you are following the procedure above The seppos say these fail all the time. I haven't seen or heard of one on here or locally, but that doesn't mean it can't happen. Finally, Ecutek are now offering tuning for the 7 speed TCM. It is basically like ECU tuning in that you have to buy a license for the computer, and then known parameters can be reset. This is all very new and at the moment they are focussing on more aggressive gear holding in sports or sports+ mode, 2 gear launches for drag racing etc. It doesn't seem to affect shift speed like you can on some transmissions. Importantly for me, by having controllable shift points you can now raise the shift point as well as the ECU rev limit, together allowing it to rev a little higher when that is useful. In manual mode, my car shifts up automatically regardless of what I do which is good (because I don't have to worry about it) but bad (because I can't choose to rev a little higher when convenient).  TCMs can only be tuned from late 2016 onwards, and mine is apparently not one of those although the car build date was August 2016 (presumably a batch of ADM cars were done together, so this will probably be the situation for most ADM cars). No idea about JDM cars, and I'm looking into importing a later model valve body I can swap in. This is the top of my TCM A couple of numbers but no part number. Amayama can't find my specific car but it does say the following for Asia-RHD (interestingly, all out of stock....): So it looks like programable TCM are probably post September 2018 for "Asia RHD". When I read my part number out from Ecutek it was 31705-75X6D which did not match Amayama for my build date (Aug-2016)
    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
×
×
  • Create New...