Jump to content
SAU Community

Wrecking R34 Turbo Auto Coupe

JiN_MaN
 Share

Recommended Posts

JiN_MaN Veteran

JiN_MaN

Posted
Posted

I have a complete R34 GT-T

Auto

Coupe

Factory white

110xxxkm

Located in Adelaide, Pick up or postage is fine.

A few prices to start the tread off but just ask and I will write back asap.

Engine $2000

Complete minus:

Turbo

Coilpacks

Water Temp Sensor

Auto Trans $250

Diff $200

Complete ket set: Ignition, doors, boot, nismo key $200

Wheels $650

Brakes: Calipers, rotors, pads $650

Return flow Genuine HYBRID Intercooler with pipes: $450

Bilstein Suspension $800

Turbo back 3" stainless steel exhaust $700

Passengers guard $150

Drivers or Passengers side mirror $70

Dash cluster $150

Triple Center Gauges in housing $150

Climate Control $100

Dash $100

Bare Shell $800

Wingless boot $150

SOLD / unusable:

Front windscreen

Airbags

Standard steering wheel

Radiator

Headlights

Bonnet

Turbo

Coilpacks

Front Bumper

Rear Bumper

Sideskirts

Headunit

Rear Lights

post-27843-0-70499400-1349094636_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/410576-wrecking-r34-turbo-auto-coupe/
Share on other sites
JiN_MaN Veteran

JiN_MaN

Posted
  • Author
Posted (edited)

do you still have the coin holder and washer bottle? how much if so and postage to NSW

Washer bottle -gone

Coin Holder - Assuming thats in the lower dash part next to your right leg? if so $35 delivered

Pics of intercooler?

post-27843-0-08151100-1349146437_thumb.jpg post-27843-0-63857700-1349146444_thumb.jpg post-27843-0-35612600-1349146452_thumb.jpg post-27843-0-17398900-1349146459_thumb.jpg post-27843-0-61185400-1349146466_thumb.jpg

hey bud you still have the front guard indicators ? if so pm me

Cheers mark

I do, $50 for the pair delivered. They are the clear ones

Edited by JiN_MaN
FeZ25 Rising Star

FeZ25

Posted
Posted

Hey mate,

Can you PM me a photo of the climate control? And do you also have the double dinn surround for the CD player? I would be interested in that also if you could price/pm photo.

Thanks,

Andrew

JiN_MaN Veteran

JiN_MaN

Posted
  • Author
Posted

Hey mate,

Can you PM me a photo of the climate control? And do you also have the double dinn surround for the CD player? I would be interested in that also if you could price/pm photo.

Thanks,

Andrew

Hopefully this covers what your after.

post-27843-0-25527900-1349146531_thumb.jpg

If you would like a more straight on photo I can grab one. I just already had this on the computer.

Climate Control $140 delivered

I dont think I have the surround that your after. Unless you can see it in the picture?

FeZ25 Rising Star

FeZ25

Posted
Posted

Hopefully this covers what your after.

post-27843-0-25527900-1349146531_thumb.jpg

If you would like a more straight on photo I can grab one. I just already had this on the computer.

Climate Control $140 delivered

I dont think I have the surround that your after. Unless you can see it in the picture?

Yeah it's not in the picture but that's okay. How much would you like for the climate control & the frame for holding the climate control + cd player? (I'm not sure what that part is called)

JiN_MaN Veteran

JiN_MaN

Posted
  • Author
Posted

Hi sorry about your car

drivers mirror

both side dash vents

delivered to sydney

cheers

Drivers side mirror (needs a polish) $60 delivered

Dash vents $40 delivered

Yeah it's not in the picture but that's okay. How much would you like for the climate control & the frame for holding the climate control + cd player? (I'm not sure what that part is called)

Guessing your talking about the 2X metal tags that hold it all in place? If so $40 delivered for the metal bits

Hey bud yea ill take the front guard indicators of you. and also how much are you willing to sell the driver side door for ?

Cheers mark

The shell of the door has a ding in it, but all internals are in good working condition.

Price for gear surround? The outer surround, not gear selector.

Also does your 34 have stock fog lights? I'm after the switch.

Fog light Switch $20 delivered

Price for steering wheel and airbag please

Id have to repack it and stitch the center back together. :P

JiN_MaN Veteran

JiN_MaN

Posted
  • Author
Posted (edited)

SOLD / unusable:

Front windscreen

Airbags

Standard steering wheel

Radiator

Headlights

Bonnet

Turbo

Coilpacks

Front Bumper

Rear Bumper

Sideskirts

Headunit

Rear Lights

Climate Control

Climate Control / Headunit Metal Holders

Passengers Door Seal

Front Guard Indicators

Edited by JiN_MaN
JiN_MaN Veteran

JiN_MaN

Posted
  • Author
Posted

Hi Matt,

What are the front seats like? I should have tried to grab the ones out the car that I got the engine out of from you a long while back!

cheers

Hey,

They dont have any marks or rips or tears but the drivers seat on the drivers side has the usually bolster wear that has resulted in the padding going a bit soft.

$250 for the pair

matt is the black aluminium trim piece above the drivers door straight? if so how much for it

cheers

Yep its straight. Id have to remove the wind deflectors first

$30

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • MBS206
      Cas issue

      By MBS206 · Posted

      It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • nash47
      Cas issue

      By nash47 · Posted

      Yes sir am asking is there possible way from aem tuner from wiring pins 
    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...