Jump to content
SAU Community

Recommended Posts

Well after a RICE cruise last night where I had a nasty vibration in the rear end...almost sounded like a diff-clunk, driveline chatter..... well. I found out what it was!

Upon closer inspection of the rear-end, ie looking at diff's tailshafts etc... I jacked the car up to have a look underneath. Only to find my rear-left side wheel nuts were all LOOSE! (YES! Including the lock nut!) I was like WTF? So I tightened them up trev-strength-stylez, and thought I'd go take a look at the other side.. OMG TWO MISSING! Some theiving ARAB tried to steal my white enkei's!

My car was parked at City West undercover all day on friday, which it hardly ever is.. So I reckon it's some chumps around there. They must have been distracted/scared away as they only done half a job on either side. Who knows.. if it had gone the other way, my rims woulda been gone!

So just a warning to all you guys that have shit-hot rims, lock nuts mean F*** ALL, and be sure to check your rims if you've parked your car in a dodgy area!

Link to comment
https://www.sau.com.au/forums/topic/41111-always-watch-where-you-park/
Share on other sites

kym, are they the "standard" lock nuts you can get from just about anywhere?

Nismo sell a special lock nut that comes with a special tool and I doubt many people here would have them. Thing is, any mechanic would have the correct tool to undo them ..

Good to hear you didn't loose your rims, thats what counts...

but yeah anyone can just hammer on a socket that is a tiny bit to small and use that to get the locknut off, or use a chisel etc...

only so much you can do... best is to park somewhere with high visibilty to people walking past, lots of lights etc... or dont park at all

Yeah.. I ain't leaving my car in any car park now!

*sigh* Yep. I had jap-spec lock nuts when I first got the car, and they were dam hard to get off.. I know this cos I lost the lock nut and failed to find a match for them. I had to replace them with the common-get-from-anywhere nuts!

$140+ for new nuts?! WTF! Might have to go sell my ass on the street corner for those mofo's! But hey, it'll be worth it!

The vibration is caused was pretty bad too, I just hope it hasn't done anymore damage (ie wheel bearings, shafts etc) I guess I'm lucky the wheel didn't come off and slice off the studs and rip out the rear-quart's!

wow close call

I had a neighbour with a HSV that wasnt so lucky (and these things come with 18s?)

and we live on mounts bay rd apartments! the car was parked in front of the lobby!

I came back after a night out at 2AM and saw his commodore on 4 bricks

which was kind of a funny sight hahah

the next morning he called the police and questioned a few of the tenants

apparently it was done around midnight.

oh the funny thing I almost forgot to mention,

apparently after midnight one of the tenants came out and saw the car, but 2 of the rims were gone but the other 2 was still there. So he must have scared the thieves off, but he didnt report it to anyone so these guys came back later and finished the job with the last 2

I must say these guys are pretty daring or stupid

bad luck kym ;)  

get ROH's ..... common as shit ..... couldnt pay the barsteds to steal them off me LOL

As Stupid as that may sound to some.... :) I couldn't agree with you more !! there are definitely certain advantages to being just like everyone else....

yeah i nearly had them off and some bastard came walking around the corner... :(

;) good to hear that you got outa that one alright kymbo....as for me i was driving down the road and about 20 blokes were standing on the side of the road....

the group slowly molded onto the road as i got closer to them (doing about 50kph) and then one ran out onto the road with something in his hand (i think it was a bottle) and try it hit my car.... he succeeded in his task hitting my mirror, braking all the mechanics inside :D and smashing the mirror :)

we hunted around all night for the group with 3 car loads of people and we found them eventually, it was fun :P

i think its time for a roo bar... :cuss:

Well after a RICE cruise last night where I had a nasty vibration in the rear end...almost sounded like a diff-clunk, driveline chatter..... well. I found out what it was!

Upon closer inspection of the rear-end, ie looking at diff's tailshafts etc... I jacked the car up to have a look underneath. Only to find my rear-left side wheel nuts were all LOOSE! (YES! Including the lock nut!) I was like WTF? So I tightened them up trev-strength-stylez, and thought I'd go take a look at the other side.. OMG TWO MISSING! Some theiving ARAB tried to steal my white enkei's!

My car was parked at City West undercover all day on friday, which it hardly ever is.. So I reckon it's some chumps around there. They must have been distracted/scared away as they only done half a job on either side. Who knows.. if it had gone the other way, my rims woulda been gone!

So just a warning to all you guys that have shit-hot rims, lock nuts mean F*** ALL, and be sure to check your rims if you've parked your car in a dodgy area!

Sounds like my story last year at Morley.....

Shame on you ARAB!!!

MarkR33,

Yeah, they have security footage of that carpark.. but the D*ckheads at city west are intent on charging $70+ to VIEW the tape. Even then it's not good quality, and the most I can do is get their rego/face and hunt them down nazi-style... :( *sigh*

Michael,

ahah! LOL! If it were Fane trying I'm sure i'd find man-jizz at the scene of the crime.. it'd be a dead giveaway! :)

Fane,

OMG! That's goatass! Gav'll be able to hook you up with some new mirror!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...