Jump to content
SAU Community

Recommended Posts

Hi guys looking to replace my engine mounts including gearbox mounts on the 33. Been looking around at some and notice that somem of the mounts ive been looking at apear a little bit different to mine. For example the driverside engine mount on my r33 is round. And the ones ive been seeing on ebay are sort of square or rectangular. Does this matter?? they are listing them for r33. Also will engine mounts from other rb models suit the 33 for example vl? or r 32? like to get these mounts sort asap because everything i see on ebay is quite exspensive for second hand and if its not second hand its nismo mounts which i really dont need its not like im running 500-600hp. Any info would be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/411110-r33-s1-rb25det-engine-mounts/
Share on other sites

You NEED R33 engine mounts, yes they are different to VL's, R31's, R32's. Im not sure if they are the same as an R34 or not.

The rectangle ones you have seen are to suit an R31 and or R32. You do not want these.

If they are listed as being R33 but have rectangle ones in the picture, its highly likely that the picture is just for illustration purposes only.

But as always, you should be careful which ebayer you buy from.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...