Jump to content
SAU Community

Recommended Posts

hi mates. i let a friend drive my car tonight. he tried a burnout in 2nd gear on the brakes and my clutch slipped for about 10 seconds roughly. wheels were spinning but clutch was slipping away and ended up smelling burning clutch.

seems ok now but just wondering if it would have damaged it. its got billet flywheel also. seemed to engage good going up a hill dropping clutch in second abit later after that so i dunno.

just worried about stuff like that

You would have put heat spots in the flywheel for sure, also taken some life out of the pads.

+1

damage yes,

needs replacing? no, not unless it slips again after it cooled down properly.

just allow to machine the flywheel next time you replace the clutch

Don't let your mate drive your car. He sounds like a f*cken idiot

+1. Also, to quote Clarkson "[On the Enzo Ferrari] “I rang up Jay Kay, who’s got one, and said: “Can we borrow yours?” and he said, “Yeah, if I can borrow your daughter, because it amounts to the same thing.”"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...