Jump to content
SAU Community

Recommended Posts

Hi all.

Ok so i have decided to save the rb30 build for a later date, mainly because I need to get my motor out, built and back in as quick as possible due to it being my daily and having no spare. Anyway, I have a forged bottom end on its way as well as arp head stud kit plus vrs to rebuild head and gaskets to stock.

I also have a haltech plus a hg 43g3 on the way and walbro fp. My question is, I have some 800cc injectors here from a previous build. Do you think these will be enough? I know 300kw is prob starting to push them but will I get away with it for a while? I havent played with e85 before so i dont even know if 300rwkw is even realistic with that setup. Opinions? Thanks in advance.

Edited by rbs30
Link to comment
https://www.sau.com.au/forums/topic/411577-injector-sizing-for-e85/
Share on other sites

From what I've gathered, you need to pretty much double your injectors for an e85 build. If your turbo is in that range and you've got a decent tuner 300rwkw on e85 should be a breeze.

I'm currently pricing up an e85 build on my rb25, aiming for 400-450awhp and have been told I'll need a big fcker of a pump and 1000cc injectors.

My guess is should be ok with upped fuel pressure

Hope that helps

Edited by s213b

Hi all.

Ok so i have decided to save the rb30 build for a later date, mainly because I need to get my motor out, built and back in as quick as possible due to it being my daily and having no spare. Anyway, I have a forged bottom end on its way as well as arp head stud kit plus vrs to rebuild head and gaskets to stock.

I also have a haltech plus a hg 43g3 on the way and walbro fp. My question is, I have some 800cc injectors here from a previous build. Do you think these will be enough? I know 300kw is prob starting to push them but will I get away with it for a while? I havent played with e85 before so i dont even know if 300rwkw is even realistic with that setup. Opinions? Thanks in advance.

800cc injectors = 435hp at the wheels

We used to devide injector size by 12 but have found it to be more like 11

435rwhp = more than 300rwkw. So I should be right. But I may be better to just go 98 Ron for the moment and up injector size and retune in 6 or so months when I have cash. Don't want to be too close to the limit.

435rwhp at what duty cycle?

435rwhp = more than 300rwkw. So I should be right. But I may be better to just go 98 Ron for the moment and up injector size and retune in 6 or so months when I have cash. Don't want to be too close to the limit.

435rwhp at what duty cycle?

435rwhp is a safe maximum assuming your pump is up to the task.

For 300rwkw (400rwhp) you need 4.5L/min fuel flow to be safe

If i have 750cc injectors and i go for a tune with a nismo fuel pump @ 14v how much rwkw can i expect ? I am wanting hopefully around 320rwkw on E85.

Or should i grab some 1000cc injectors to be safe ?

And if i want to drive to the tuner, can i just plug in that nistune cable and then set the injector size on the pre-existing tune or is there more to it ?

Thanks

If i have 750cc injectors and i go for a tune with a nismo fuel pump @ 14v how much rwkw can i expect ? I am wanting hopefully around 320rwkw on E85.

Or should i grab some 1000cc injectors to be safe ?

And if i want to drive to the tuner, can i just plug in that nistune cable and then set the injector size on the pre-existing tune or is there more to it ?

Thanks

Need to know more than what injectors u have mate lol! The nismo pump will be fine I believe they are good for up to 400kw........Stand to be corrected if I'm wrong lol

Ok cool. Sounds like it will be close enough. I'm running a walbro 90000267 e85 pump. If that runs out ill just use my old one as a lift pump and run 2 of the e85 pumps off a surge tank.

I think the way to go is to just run e85 and tune it to a safe injector duty cycle and be happy with it until I've got money for bigger squirters.

Cheers for the assistance.

Need to know more than what injectors u have mate lol! The nismo pump will be fine I believe they are good for up to 400kw........Stand to be corrected if I'm wrong lol

Its already made 304rwkw on 98 fuel so the other mods are fine, im just worried the injectors are too small for e85. Is it bad if they are at like 90% duty cycle ? Its not a track car so i wont WOT all the time.

If i have 750cc injectors and i go for a tune with a nismo fuel pump @ 14v how much rwkw can i expect ? I am wanting hopefully around 320rwkw on E85.

Or should i grab some 1000cc injectors to be safe ?

And if i want to drive to the tuner, can i just plug in that nistune cable and then set the injector size on the pre-existing tune or is there more to it ?

Thanks

I have made 360rwkw with Nismo 740cc with some head room. You will be fine at 320rwkw.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...