Jump to content
SAU Community

Recommended Posts

hi guys,

I just purchased a JJR 3" dump pipe and got my mechanic to fit it today and ran into trouble.. when dump pipe was fitted bottom of turbo flange was flush but had a 10-12mm gap at the top and the flange at the cat end didn't quite line up and was hitting the trans x member and couldn't get it to fit at all.. bit of a mystery as saw other ppl were running the same dump pipe on there stags.. just wondering if anyone has had the same problem..

cheers guys

Link to comment
https://www.sau.com.au/forums/topic/411704-jjr-3-dump-pipe/
Share on other sites

hi there,

yeah it's a JJ 3" stainless bellmouth dump pipe.. I also have a x force cat to.. have to send it back so they can have a look at it and send me another one.. after two attempts of getting a dump pipe on my stag maybe I mite get one that fits..

Link to comment
https://www.sau.com.au/forums/topic/411704-jjr-3-dump-pipe/#findComment-6582308
Share on other sites

r33 or 34?

some have reported r34 ones not fitting

i've got a r33 one on mine, i nudged the exhaust on something when reversing once and it hit the transmission for a while but i bent it back a bit and now its ok

you may have to get an exhaust shop to tweak it a little

Link to comment
https://www.sau.com.au/forums/topic/411704-jjr-3-dump-pipe/#findComment-6582350
Share on other sites

I fitted one up recently (SS R33 type), I found the top flange ok, but the bottom one was about 10mm inboard towards the trans and 5-10 mm shorter lengthways.

I had to rejig the hanger/mount near the trans crossmember with an S bend and some notched holes....

The flange was really close to the trans Xmember.

Pulled my rear muffler just under my bumper, was pretty bummed but couldnt be arsed with sending back accross the other side of the country to get the exact same piece.

My car has 80% more sad kitten sounds though.

Link to comment
https://www.sau.com.au/forums/topic/411704-jjr-3-dump-pipe/#findComment-6582507
Share on other sites

Maybe it is the Chinese who are not making them properly.

I have a JJ copy of a Gready FFP. The one I got was perfect and nicely chromed. Others I hve heard that have had to be machined flat

for the gasket to seal. There was one at NIZPRO the other day and it was shit. Jeff was sending it back.

Link to comment
https://www.sau.com.au/forums/topic/411704-jjr-3-dump-pipe/#findComment-6582853
Share on other sites

Here's a photo sent by a customer as the Flange on those dumps wasn't milled out 100% to dump pipe gasket. It would affect turbo's performance as the step is right at where the turbine wheel sits. Would defiantly require some di-grinding and welding before installation.

155652_531339400213757_1005918000_n.jpg

Link to comment
https://www.sau.com.au/forums/topic/411704-jjr-3-dump-pipe/#findComment-6582871
Share on other sites

That is shitty. I got my stuff about two years ago and it was first class. Sorry to see such substandard stuff coming in.

But it is not just the automotive trade that is suffering.

My wife (Mrs 66) is an artist, a VERY GOOD ARTIST, and we have an Art Gallery on Mt. Tamborine. Chinese canvas print "art" is killing the market out here.Eight years ago there was 28 picture frame moulding manufacturers in China. Today there are seven. Cheap and nasty survives. Quality goes out the window.

Link to comment
https://www.sau.com.au/forums/topic/411704-jjr-3-dump-pipe/#findComment-6585133
Share on other sites

Sh1t, I just ordered the wrong one off JustJap. I accidentally ordered the R34 model.

Luckily, I called in time and changed to the R32/R33/C34 model instead - same price too.

Don't make the same mistake I did, otherwise it will be a bit longer and won't fit!

http://justjap.com/s...316&cat=&page=1

Edited by tchard
Link to comment
https://www.sau.com.au/forums/topic/411704-jjr-3-dump-pipe/#findComment-6593107
Share on other sites

Here's a photo sent by a customer as the Flange on those dumps wasn't milled out 100% to dump pipe gasket. It would affect turbo's performance as the step is right at where the turbine wheel sits. Would defiantly require some di-grinding and welding before installation.

155652_531339400213757_1005918000_n.jpg

I cant tell if thats worse than mine, checked the gasket against the opening and there wasnt more than a mm smaller.

2012-09-17150908.jpg

Link to comment
https://www.sau.com.au/forums/topic/411704-jjr-3-dump-pipe/#findComment-6594393
Share on other sites

Is that a JJR one too?

Yours actually looks like it fits ok :/

Yeah its an r33 jjr.

Iit fit 'ok', had to bash the metal inwards near the middle bolt down on the head side so you could get a socket on the bolt, and rejig the hanger at the gearbox xmember a little but apart from that, yeah...

Link to comment
https://www.sau.com.au/forums/topic/411704-jjr-3-dump-pipe/#findComment-6596352
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...