Jump to content
SAU Community

Recommended Posts

Just turn it off - I do. With my rather noisy exhaust I don't like to annoy my neighbours anyway by booting it up the street. At the track just do a cool down lap open the bonnet to check all is well and then turn it off.

Personally I would only use a turbo timer on cars fitted with either a oil-cooled only turbo (70s/80s turbos generally weren't water cooled) or a journal bearing turbo (especially a ceramic turbo) as they have afair amount of oil sitting inside them at any time so more likely to 'choke' the oil vs a ball bearing turbo which uses restrictors (they literally really only needs drops of oil)

Well if idling is so bad for the car why is it advised by the owners manual and so many people who drive turbos and almost any guide i've ever read about the basics of owning a turbo car?

My R34 is running stock turbo, pretty sure it's a ceramic and from what i've read is they are supposed to have idling times.

I was also explained by someone, although i don't confirm that this is factual knowledge, that when you just turn the engine off something about cold air rushing into the turbo and coming into contact with the ceramic and causing a damaging crack effect, such as extreme heat and cold do when they come in contact.

Well if idling is so bad for the car why is it advised by the owners manual and so many people who drive turbos and almost any guide i've ever read about the basics of owning a turbo car?

My R34 is running stock turbo, pretty sure it's a ceramic and from what i've read is they are supposed to have idling times.

I was also explained by someone, although i don't confirm that this is factual knowledge, that when you just turn the engine off something about cold air rushing into the turbo and coming into contact with the ceramic and causing a damaging crack effect, such as extreme heat and cold do when they come in contact.

Probably cos its better to recommend to idle down to everyone for those who flog the car before turning it off. Otherwise could be warranty issues for those who did the wrong thing and usually complain the loudest.

Saying to idle down if its been driven hard could be viewed differently depending on your view of hard.

Turbine blades go from 0 to instant heat on startup, they cool down much slower than they heat up. Cold air can't just rush in

To answer your original question the cheapest HKS turbo timer is around AU$100 so its definitely a cheap knock - off.

I threw out the turbo timer that was in my original Stagea with stock turbo and the turbo was still fine when I later upgraded and sold it...no sign of cold air damage!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...