Jump to content
SAU Community

What size exhaust is good for R33 GTST


nizmokid
 Share

Recommended Posts

i think merli said it before...but is there any point to gutting a cat for 3 or 5 extra Kw's? over the cost of health and the environment ??????

3inch from turbo to high flow cat, 31/4 cat back. Lag shouldn't be a problem.

Link to comment
Share on other sites

Originally posted by torana_mad

If you think you can get away without putting one on (or want to chance it) then why pay $$$$ for one.(though i dont see the point in it to get one only to gut)

Aslo if your the type to worry about the environment then dont drive or even sell the car and buy a push bike.

Ash.

So everyone that owns a car and doesn't care about the environment should have no cat then? I feel that we should at least try and prevent as much environmental damage as we can, and if that means using a cat, then we should do it. Choosing to run without a cat for a few kws is just not right in my eyes.

Link to comment
Share on other sites

Originally posted by KamikazeR33

a high flow cat should give u the same power as a gutted one or none at all

i was using a straight through pipe for a bit on the '33, when i got a 4" high flow cat i didn't notice any difference in power output.... and people driving behind me weren't passing out. :) :)

Link to comment
Share on other sites

I tried to post this at TAFE, but the computer screwed up. And a few people have already posted...

BUT. What I wanted to write at the time...

I think the attitude really really sucks on this. I wouldn't count me as a Greenie at all.

The removal of a cat is just plain stupid, and isn't going to be doing any of us any favours. The modified car scene is already tainted as it is without giving the local powers that be another reason to crack down on us.....All for a few kilowatts of power which I bet you couldn't even notice.

The cat, sa far as I understand, is there in an effort to change the raw exhaust gas to something which is alittle less harsh and can fliter back into the air as cleanly as possible. Tell me, how offen have you been pissed off with a car in front spewing rotten gas onto you and your car ? Why join them.....

If your off to the racetrack, yeah sure fit the pipe to bypass the cat...But for street use, when the car is going to burn most of its fuel.....I can't see a cuase for not having a cat....geezz you can even get high flow cats!!!

........That was my ramble..

NO CAT=DUMB.

ANDREW

Link to comment
Share on other sites

It's one thing to go on about the stupidity of running without a catalytic converter, but how often does the average Joe check or replace a tired cat'?

Under ADR 37-00 your cat' is required to last 80,000km or 5yrs, whichever occurs first! How many cars on the roads in OZ would've had a cat' (or cat's) changed in their lifetime? Unless it’s totally stuffed & the honeycomb has collapsed into small bits you’d probably never know it wasn’t doing its job, unless the smell becomes MORE noticeable.

It’s my guess that apart from the performance automotive market & the EPA nobody else really thinks a hoot about the condition of their cat'!

An ineffective or blocked/damaged cat' is about as good as no cat' at all, worse in fact, 'cause it's not doing much for the environment OR the engine!.

My 2.2c

Note: NZ’ers aren’t legally required to run a cat’, so watch out on the East Coast when the wind’s really strong from that direction :)

Link to comment
Share on other sites

You're right on the money there mate... Any car with more than 5 years on the clock is more than likely going to have a cat that isn't very effective at blocking all the noxious gasses coming out the back of their cars...

How many people do you know that actually change em? My last car was a camira with 200,000kms on it, still running the original cat! Tell me that wouldn't have been stuffed!

:)

matt

Originally posted by whatsisname

It's one thing to go on about the stupidity of running without a catalytic converter, but how often does the average Joe check or replace a tired cat'?

Under ADR 37-00 your cat' is required to last 80,000km or 5yrs, whichever occurs first!     How many cars on the roads in OZ would've had a cat' (or cat's) changed in their lifetime?  Unless it’s totally stuffed & the honeycomb has collapsed into small bits you’d probably never know it wasn’t doing its job, unless the smell becomes MORE noticeable.

It’s my guess that apart from the performance automotive market & the EPA nobody else really thinks a hoot about the condition of their cat'!

An ineffective or blocked/damaged cat' is about as good as no cat' at all, worse in fact, 'cause it's not doing much for the environment OR the engine!.

My 2.2c

Note: NZ’ers aren’t legally required to run a cat’, so watch out on the East Coast when the wind’s really strong from that direction :)

Link to comment
Share on other sites

Andrew: YOUR A DIRTY GREENY! ;)

Have u seen the internal matrix of a cat? In essence it makes the exhaust gas cover a surface area of a football field! That can't be helping performance!

To protect the environment form all the non-cat people of the world i shall smoke one less cigarette a day!

werd, peace, respekt, out!,

Cheers,

Captain Planet!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Embrace the freedom of casual encounters on the best dating app in town! Verified Maidens Superlative Сasual Dating
    • Slimline sub on the rear parcel shelf is doable. Pioneer TS-WX140DA is only 70mm high.   
    • People like Johnny Dose Bro might be laughing at my post because I accidentally added 100mm to my numbers. 350-355 is indeed the lower limit. 450 is off-road Skyline spec.
    • What is the "compromise" that you think will happen? Are you thinking that something will get damaged? The only things you have to be concerned about with spherical jointed suspension arms are; Arguments with the constabulary wrt their legality (they are likely to be illegal for road use without an engineering certificatation, and that may not be possible to obtain). A lot more NVH transmitted through to the passengers (which is hardly a concern for those with a preference for good handling, anyway). Greatly increased inspection and maintenance requirements (see above points, both).   It is extremely necessary to ask what car you are talking about. Your discussion on strut tops, for example, would be completely wrong for an R chassis, but be correct for an S chassis. R32s have specific problems that R33/4 do not have. Etc. I have hardened rubber bushes on upper rear control arms and traction rods. Adjustable length so as to be able to set both camber and bump steer. You cannot contemplate doing just the control arms and not the traction arms. And whatever bushing you have in one you should have in the other so that they have similar characteristics. Otherwise you can get increased oddness of behaviour as one bushing flexes and the other doesn't, changing the alignment between them. I have stock lower rear arms with urethane bushes. I may make changes here, these are are driven by the R32's geometry problems, so I won't discuss them here unless it proves necessary. I have spherical joints in the front caster rods. I have experienced absolutely no negatives and only positives from doing so. They are massively better than any other option. I have sphericals in the FUCAs, but this is driven largely by the (again) R32 specific problems with the motion of those arms. I just have to deal with the increased maintenance required. Given how much better the front end behaves with the sphericals in there.....I'd probably be tempted to go away from my preference (which is not to have sphericals on a road car, for 2 of the 3 reasons in the bulleted list above), just to gain those improvements. And so my preference for not using sphericals (in general) on a road car should be obvious. I use them judiciously, though, as required to solve particular problems.
    • Easiest way to know is to break out the multimeter and measure it when cold, then measure all the resistances again once it gets hot enough to misfire. Both the original ignitor and the J Replace version. Factory service manual will have the spec for the terminal measurements.
×
×
  • Create New...