Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Plz let it be in english ,I just got a 1999 Nissan Gloria Ultima from Japan and everything is in Japanese, giving me headaches to navigate thru most stuff.I am in love with this car,just that part of trying to figure out those buttons and the radio is what is a pain.

  • 2 weeks later...

Hi all, Does anyone have that manual i've been hearing so much about? I have a 2004 cedric and cant figure out these buttons if it was to save my life!!! Can someone send it to me as well as anything else that may be helpful? thank you all in advance! My address is [email protected]

Hi all, Does anyone have that manual i've been hearing so much about? I have a 2004 cedric and cant figure out these buttons if it was to save my life!!! Can someone send it to me as well as anything else that may be helpful? thank you all in advance! My address is [email protected]

email sent.

  • 3 weeks later...
  • 1 month later...

Hey guys, just bought a Y34, and wondering if its possible to get a copy of this manual? [email protected]

Cheers

sending through now.

just a plug:

Myself and some other are collecting lots of info on Y34's on a different forum. Part numbers, aftermarket options, DIY's and model information.

jump on http://www.zeitakuvip.com/forumdisplay.php?9-How-to-s-amp-Tutorials

  • 1 month later...
  • 1 month later...

BurtoN86, thank you for getting this whole manual translation going, you are a legend! Leroy well done for keeping the infor flowing!

I am enjoying my cedric but i dont have a manual for it, and have no way of adjusting stuff! The mpg is quite heavy though, i suspect something is not right perhaps in the tranmission because when I drive in manual it does not go further than gear number 3! Also intermitently the revs are too high but if i pull off, switch off and get it started again then the revs will be back to normal, any ideas as to what could be wrong guys and if there is a quick fix.

I want to replace transmission fluid, does it take normal ATF?

I am so glad to meet other Cedric owners, will you also please send me the English translation to [email protected]

Edited by carvinezw

I am enjoying my cedric but i dont have a manual for it, and have no way of adjusting stuff! The mpg is quite heavy though, i suspect something is not right perhaps in the tranmission because when I drive in manual it does not go further than gear number 3! Also intermitently the revs are too high but if i pull off, switch off and get it started again then the revs will be back to normal, any ideas as to what could be wrong guys and if there is a quick fix.

I want to replace transmission fluid, does it take normal ATF?

I am so glad to meet other Cedric owners, will you also please send me the English translation to [email protected]

If the car is sluggish and doesnt change gears (always in gear 3, manual or auto), and there is an AT Check light on the dash, the gearbox is in limp mode and something is wrong.

Manual control is very unresponsive even when working properly. So are you able to run through any of the gears in manual? does it change in auto-mode? Is the car set in Snow-mode or Fast-mode? (theres a small switch next to the shifter.

for normal 4-speed auto (RE4) a Dex III (3) oil is fine, or Nissan matic-D.

file sent.

Hopefully ill get a chance to re-write the translation document. its pretty poor.

Great see so many people finding the English translation doc for Y34 so useful!

All Y34 owners, jump on zeitakuvip.com for all the helpful info on what these cars require in terms of servicing, oil, parts etc.

It's a great community on there with like minded VIP owners :)

Hi, new member here. I've had a 1999 Y34 Cedric for a couple of years now and I think the time is right to request a copy of the Y34 Manual in English!! If one could be emailed to me at [email protected] I would be eternally grateful. Thanks in anticipation. Oh, and I must say it is great to see that there are many Y34 owners out there. I've only ever seen one since I've had mine. Lloyd.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The real question is, on some of those wild roads they call highways, how many times did a farmer in an old ute from the early 2000s blaze past you over double lines?   Tassie is a wild and really cool place, and after doing a work related road trip there January of 24, I understand why Targa Tasmania is ran there, and is so tough to do well at! We had a brand new Camry Hybrid that handled quite nicely, and thankfully weren't in an old car, because cresting some of those hills in a 100kmh zone for it to suddenly be like "surprise f**kers, this is a recommended 30kmh hard right turn" wouldn't be pretty. We weren't racing the Camry around, but we weren't slouching in the bends either. But my lord those old farmers know their old clapped out utes, and those roads, as they were absolutely hammering it!   You're also super lucky to make it up to Mt Wellingtong this time of year. It's often road closed with snow/ice! Also, I hope you hit up Salamander Road in Hobart for some insanely good food (I highly recommend the dimly lit Irish pub for a Guiness Pie, or even the bangers and mash!!!)   How long did the Ferry take to get across? I want to do a road trip of Tas on my own time, but I get horrifically sea sick, and I don't want me on the Ferry, just the car 😛
    • So far so good, about 30km on it so far and nothing out of sorts yet thankfully
    • Look at @Kinkstaah's thread on the issue.
    • Hmm not really, I'd say its race car life or modified car life when you make 3 or 4 times the power Nissan designed the car for lol. 
    • I'll let others with more breakage chime in, but I can't think of anyone who had a problem with the standard centre plate before they had a problem with the standard gears - the plate generally just gets replaced for safety when the gearset is upgraded. As for the gearsets, its not like they are OK at 600Nm and break at 601. Their longevity is a combination of how much torque you are making and how gentle you are on shifts (or not). 
×
×
  • Create New...