Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • 3 weeks later...
  • 4 months later...
  • 1 month later...
@BurtoN86 if you ever sell your Gloria, would be highly interested, very hard to find one in Adelaide unfortunately, look after the beaut! [emoji106]

There is a few adelaide members on zeitakuvip.com with Y34's, imports seem to be pretty popular over there. A few cimas around too, if you wanted a V8.

Just an update on this translation document, I've gotten my hands on a Nissan Japan manual for the radio and navigation system and a number of other booklets/brochures. Updating it isnt my biggest priority, so I may just scan the pages and upload them and people can use google translate once they find what they need. I'll post a link here once its all scanned.

  • Like 1
On 9/5/2016 at 10:03 PM, Boybetterknow said:

@BurtoN86 if you ever sell your Gloria, would be highly interested, very hard to find one in Adelaide unfortunately, look after the beaut! ?

Haha cheers! have you seen it locally or? Feel frree to PM if you like :)

  • 3 weeks later...

Hi all, i have recently bought y34 rb25det neo engined cedric and im in complete love with it, however i do have quite a big problem understanding display unit and apart from engine which is familiar i have little to none knowledge of servicing, part interchangeability, etc.

If anyone could be so kind and send me a translated manual or any other cedric related info it would be greatly appreciated!

My email is [email protected]

Thank you guys for keeping this thread alive, as it has been a one of very rare sites, who has any info on these underappreciated cars! :)

 

Cheers!

  • 2 weeks later...

Hi again guys, i love my cedric howevee it has developed a fault and i hoped maybe you could point me in right direction....

Basically - radio and ac/heating unit does not work at all. Rear demister works and vol. Buttons on steering wheel works but rest of it is not responding to anything. 

Any ideas guys???

Yes mate done that. No change though :(

Is there any fuse box diagram for cedric floating around ? I read that similar year nissan primeras has issue where radio and heater controls stop working and its to blame connecto m54 or fuse 10, however without diagrams that isjt much of the help lol

 

No change? Did you check continuity of the fuses or...?

The only other thing i can suggest is to google similar issues for Infiniti M45's. Its a more reliable source than assuming a common problem with primeras. the M45s run a Bose stereo but most of the interior wiring should be the same. Theres a factory service manual available for the M45 (i have the link bookmarked but dont have it right now) which could possibly help.

Right, kept on tinkering with radio unit and disconnected ribbon going to tape deck , and what do you now, suddenly am/fm/cd started working - but only through steering wheel controls... still no luck with getting any buttons on unit itself to respond. The biggest worry is about heater controls though, because at the minute they are at 18.5 Celsius and its freezing inside the car lol :))))

  • 1 month later...
  • 3 weeks later...
  • 2 weeks later...
  • 4 weeks later...

hi all, newbe to the forum and would also like a manual in english if its no too much hassle please, email [email protected], ime in bonnie scotland, thanks lads n lassie.s,:14_relaxed:

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...