Jump to content
SAU Community

Recommended Posts

Hi guys,

Just got a 350gt imported over from japan -- and looking at getting a SECURED loan to pay off the car -- St George declined my application because the car is imported -- are there any banks that will accept a SECURED loan for the car?

ta!

S.

Link to comment
https://www.sau.com.au/forums/topic/412659-loan-repayment-for-imported-cars/
Share on other sites

Hi guys,

Just got a 350gt imported over from japan -- and looking at getting a SECURED loan to pay off the car -- St George declined my application because the car is imported -- are there any banks that will accept a SECURED loan for the car?

ta!

S.

Welcome, Steph! A secured loan means the bank uses your vehicle as security on the loan - in other words, if you stop paying your loan, they take your car back. If the car isn't in Australia, it makes it pretty much impossible for a bank to repossess your car if you default on your loan. Unsecured loans are your only option if you want to get something from Japan.

A lot of my guys get an unsecured loan with low break fees/higher interest rate while the car is on its way over, then switch to a secured loan once it's registered.

Hi Steph, welcome to the group! (You should check out the V Section - it's where the cool kids hang :P )

In regards to your loan, as Chef said, a secured loan essentially means that you are offering the bank some form of security regarding the payment. 9/10 times this is the vehicle that you're purchasing. For a vehicle to meet their criteria, it must be registered in Australia and in a road worthy condition. You provide the bank with all the details, ie VIN, Chassis No, Engine No, Plates, etc. and they go and ensure it's a legit purchase. They also make sure that it's a reasonable price. They don't want to give you $30k for something that maybe only worth $20k.

Best bet is an unsecured loan which does have more stringent borrowing criteria and higher interest rates. Alternative is, buy one that has already been registered here.

Hope that helps. :)

All the above information is very good, i am no Business Manager but correct me if i'm wrong i beleive that an unsecured loan will have a higher interest rate opposed to a secured loan.

I kind of wish my loan was unsecured but nevertheless i am happy with the car.

Try a few different places, sounds weird they didn't approve you.. the hardest problem i had with my loan was explaining to the consultant what type of car it was LOL

One key thing, that has been mentioned in passing, is that most major lenders will NOT enter into a secured loan for cars that are older than 5-7 years (depending on the lender). So, after you bring the car to Australia via unsecured loan, you might either need to engage the services of a broker or try and negotiate something with your bank.

Welcome Steph.

Do your folks have a mortgage + you have an income + you're trustworthy?

If so, you can obtain a loan at low interest on your car if your folks take ownership of the car whilst you pay it off, and they consolidate the car with the home loan.

When I was about 8,...

I said to Dad, "Mum says that you might loan me some money for my Matchbox car collection - please?"

Dad:- "I might if you give me security on the loan."

Me:- "What's security Dad?"

Dad:- "It's when I've got you by the short 'n curleys."

Me:- "What's short 'n curleys?"

Dad:- "You'll know in 5 years."

How old is the car?

You'll struggle to get anything older than five years old secured, and 10 years + is simply not an option.

Being an import adds a whole new layer of difficulty.

TBH you'll be best going unsecured and copping an extra couple of percent interest. The chance of getting it secured it 5/5ths of FA.

Give Haylee Reid at Mildura Finance a call on 03 5051 0400 - she'll be able to give you a definite answer on where to get the best deal. Don't worry about the Mildura part, they have brokers all over the state who they can put you in touch with or even write the loan from there.

I must be the only bloke in the world with a secured loan on a car that was 11 years old when I bought it.

I went through a credit union, they were great. Much cheaper and more flexible than a bank.

My car was already in Australia though, but don't discount secured loans based on the above feedback.

How long ago was that, Ryan? Lending practices changed, dramatically, post 2008. Once upon a time you could borrow 105% of the value of a home. These days it's 90% unless your an existing customer where you might get 95%. Some banks are even limiting all lending to 80% these days.

And what was the actual rate you paid vs. unsecured with other lenders? Also, which credit union? If you paid 13% "secured" but could have got 11% unsecured with another lender, then the whole secure thing is a bit pointless.

How long ago was that, Ryan? Lending practices changed, dramatically, post 2008. Once upon a time you could borrow 105% of the value of a home. These days it's 90% unless your an existing customer where you might get 95%. Some banks are even limiting all lending to 80% these days.

And what was the actual rate you paid vs. unsecured with other lenders? Also, which credit union? If you paid 13% "secured" but could have got 11% unsecured with another lender, then the whole secure thing is a bit pointless.

That was last year Aaron. Practices have loosened up a bit more now. I got about 10-11% secured. It was Police Credit Union in Adelaide - great people to deal with, and their car loan was rated one of the best in the Canstar ratings. The guy even sent me a text message when I was driving the car back from Sydney to make sure all was OK!

All I'm saying is what you blokes are saying above is based on your experiences. It is not fact, even if some people make out that everything they post is, and the OP may have better luck shopping around than you all have. I certainly have had a better experience than those listed above.

That was last year Aaron. Practices have loosened up a bit more now. I got about 10-11% secured. It was Police Credit Union in Adelaide - great people to deal with, and their car loan was rated one of the best in the Canstar ratings. The guy even sent me a text message when I was driving the car back from Sydney to make sure all was OK!

All I'm saying is what you blokes are saying above is based on your experiences. It is not fact, even if some people make out that everything they post is, and the OP may have better luck shopping around than you all have. I certainly have had a better experience than those listed above.

Actually what I'm saying is based on me working in the finance industry. I don't have a loan of any variety.

What you got is a long, long, LONG way from the norm.

And you've somewhat reinforced what I said. You can get 11-12% non-secured through ANZ at the moment. Going off the PCU site, they offer 11% comp. rate for cars no older than 5 years. It would seem you got lucky to get them to secure against an 11 year old car. What car is it, out of interest?

And are you a copper by any chance?

Oh, and lending practices are actually still tightening. Lenders have become fundamentally more risk averse and are changing their practices accordingly.

Actually what I'm saying is based on me working in the finance industry. I don't have a loan of any variety.

What you got is a long, long, LONG way from the norm.

And you've somewhat reinforced what I said. You can get 11-12% non-secured through ANZ at the moment. Going off the PCU site, they offer 11% comp. rate for cars no older than 5 years. It would seem you got lucky to get them to secure against an 11 year old car. What car is it, out of interest?

And are you a copper by any chance?

Oh, and lending practices are actually still tightening. Lenders have become fundamentally more risk averse and are changing their practices accordingly.

I thought you worked in IT?

Not a copper, not an existing PCU customer, and they were able to offer me what my bank of a million years couldn't: a secured loan on a 2001 Stagea, which was about 10 years old at the time. I'd need to double check the interest rate, but off the top of my head it was 11% and at the time I fixed it, which hasn't worked out to be my best ever decision but I had the option either way.

I have no reason to expect this was a long way from the norm, since I didn't do any particularly special negotiating or anything else.

I work in IT within the finance industry.

The deal you got is an exception to the rule, rather than the rule itself.

Does that mean if I'm the secretary for a dentist I can start performing root canals?

My point was that if you look around its possible. I had no idea my case was an exception to the rule, but I'd be willing to bet if it was as easy as it was for me it wasn't a one off, so look around until you find someone at a decent rate who's prepared to offer what you need.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...