Jump to content
SAU Community

Recommended Posts

What he described Melatonin would have no affect. He didn't say he had trouble sleeping. He said sleeping didn't make him feel any better. Big difference. Melatonin only really helps insomnia (In some cases) and in small doses (about 3 months or so) apart from that there is very little evidence that says the drug even helps with that.

The most common cause of sleep issues is stress. The OP sounds like he is just stressed at the moment and it will pass. However what FIGJAM explained is a completely different condition.

One of those people who says it won't work, so why even bother trying? Suck my dick. Have/had the same issues as Mitch and melatonin helps. He has nothing to lose but a few dollars.

Link to comment
https://www.sau.com.au/forums/topic/412794-sleeping/page/2/#findComment-6773013
Share on other sites

One of those people who says it won't work, so why even bother trying? Suck my dick. Have/had the same issues as Mitch and melatonin helps. He has nothing to lose but a few dollars.

No need to get butthurt. The drug is great for fixing sleeping paterns and fixing insomnia. But has little to no affect on people that sleep (not take hours to fall asleep, Toss and turn, and wake up). Honestly You are just better off making sure you eat right/Keep hydrated properly and hope that it goes away. Doctors still have no idea why this can occur with some people or what causes it. There is also no known help for it. It's basically try to stay as healthy as possible and sleep as much as you can.

Link to comment
https://www.sau.com.au/forums/topic/412794-sleeping/page/2/#findComment-6773026
Share on other sites

Welcome to falling for a placebo.

+1.

all medication works better when you believe it will.

i had acupuncture. thought it was a load of bollocks, turned out it was a load of bollocks. but yet has help my rehab mate with the same problem.

Link to comment
https://www.sau.com.au/forums/topic/412794-sleeping/page/2/#findComment-6773038
Share on other sites

Welcome to who gives a shit as long as it works?

That is the worst reason I've ever heard for taking a drug. Especially one that does nothing to help with the issue. You are much better off going to a doctor and talking about ways that will actually help.

Not to mention that you can't actually get it in Australia legally. However it is legal to import the stuff. So why go to that much effort for something that messes with your sleep cycles more and if taken for longer than 3 months can have some other more serious side effects. There is a reason why this isn't an over the counter drug in Australia.

Link to comment
https://www.sau.com.au/forums/topic/412794-sleeping/page/2/#findComment-6773057
Share on other sites

I slept like a baby last night.

I've got half a bag of creatine* for the person who can answer why I slept so well.

*used by date may start with 199

you spend that much time in the gym that you cried yourself to sleep knowing youll be forever alone?

Link to comment
https://www.sau.com.au/forums/topic/412794-sleeping/page/2/#findComment-6773116
Share on other sites

That is the worst reason I've ever heard for taking a drug. Especially one that does nothing to help with the issue. You are much better off going to a doctor and talking about ways that will actually help.

Not to mention that you can't actually get it in Australia legally. However it is legal to import the stuff. So why go to that much effort for something that messes with your sleep cycles more and if taken for longer than 3 months can have some other more serious side effects. There is a reason why this isn't an over the counter drug in Australia.

A drug working is NOT the worst reason people take drugs, it's the ONLY reason people take drugs. Once again, you're saying that it does nothing to help the issue...when it does. I can't do much more than tell you that, as a user, it works for me. I can't comprehend how you can possibly refute this? It's ridiculous.

What effort? Buying off eBay delivered straight to your door? Do you get up to take a piss or just do it in the bed?

Blah blah sidetrack and move onto the legalities and dangers of melatonin after 3 months. Yes, because I recommended he try it for 12 months straight...or you could just admit you were wrong...whichever is easier for you. Melatonin is produced by your body. Trialling it for a week or two is going to do him no harm...and again...he has nothing to lose but a few dollars.

I'm done here, you're ridiculous.

Link to comment
https://www.sau.com.au/forums/topic/412794-sleeping/page/2/#findComment-6773117
Share on other sites

Looks like I left a lot out.

Intentionally,...

After all, tis just a forum.

Liver:- It produces Vit B3 & l-Tryptophan & l-Taurine

Some people don't manufacture enough and it's either genetic along a same sex line (aka agnate) or it's farked up after using certain recreational drugs.

Brain Stem > Circle of Willis:- Here, the l-Tryptophan is converted to 5HTP and then Serotonin. Vit B3 helps the Serotonin to be utilised better.

Pineal Gland:- Excess Serotonin gathers here. Taurine gathers here. Collectively, they form Melatonin. Melatonin is formed to some degree in daylight. Then it's released after sundown. When released, one feels sleepy > throughout the night it helps circadian rhythms and REM.

Supplements:- If your same sex parent has had sleep problems or if you've farked with drugs, Melatonin can be obtained as 5mg lozenges that you suck before bed.

Better still, get a HOD Test (Uni Saskatchewan Inventory) done to see how short you might be of Serotonin. Serotonin deficiencies cannot be tested by scans/blood/urine/hair. If your mind races before going off to sleep, you're likely to be short of B3 & l-Tryptophan > Serotonin > Melatonin.

GL

Link to comment
https://www.sau.com.au/forums/topic/412794-sleeping/page/2/#findComment-6773874
Share on other sites

Circadian rhythms dictate quality as well as quantity of sleep.

And quality will depend on...

a) amplitude of brain waves without the REM peaks intersecting with the waking state. The higher the amplitude the better

b) frequency of brain waves per unit time. The more waves per hour the better

Barbiturates of old used to cause slow waves and low amplitude > waking up with headaches as well as fatigue.

Benzodiazepines cause a few more waves per unit time and amplitude is somewhat higher > waking up a bit more rested but some are still fatigued. Valerian herb can do this too.

Meditation and hypnosis > REM peaks close to waking state and frequency of waves are markedly higher. You are also in this state during those minutes before awaking. Tis great when you don't have to get up for a bit.

Anyone use the iPhone app that detects movement as a precursor to alarm-waking at the right moment?

Link to comment
https://www.sau.com.au/forums/topic/412794-sleeping/page/2/#findComment-6773887
Share on other sites

Insulin resistance problems and hypoglycaemia can lead to disturbed sleep.
A telltale sign is a blood sugar dip > listlessness an hour or two after lunch.

Eclectically, there may be about 14 causes of low blood sugar > if that continues for too long > diabetes type-2

Link to comment
https://www.sau.com.au/forums/topic/412794-sleeping/page/2/#findComment-6773889
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...