Jump to content
SAU Community

Recommended Posts

Hi Guys,

After some wheels for my V35 coupe.

Wanted to know your thoughts on 19x9.5 fronts and 19x11 rears? Is anyone running these specs and fitted onto thier v's? i'd love to see some pics.

Also after some research ive found that i would need to run 245/35/19 fronts and 275/35/19 for the rears. Offset is +12 front and +15 rears.

Questions are

1. Will 245/35/19 fit on the 19x11 rears? cause atm i have 245/35/19's all round...if not let me know what tyres will fit best

2.Will i need to roll my guards?

3.Do i mount the wheels on first with the tyres then see what sort of drop i will need? springs/coilovers thoughts?

4. If i do need to roll guards, do i need to have the car dropped first and go from there or do i roll them first with wheels at stock height before dropping?

Please advise, im not very cluey when it comes to wheels/tyre fitment.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/414105-rolling-guard-and-suspension/
Share on other sites

1. yes - those tyres will fit but be fairly stretched. I'd try go for a

2. yes - this is a pretty agressive fitment

3. up to you. for such an agressive setup though, I wouldnt even consider springs. You're going to need the fine tuning capabilities of coilovers to get your ride height/clearance the way you want it. Springs leave little margin for error - they'll either clear or they won't.

4. Roll gaurds, suspension, fit wheels - best plan.

For info on how its going to look - go to www.rimtuck.com and find a setup that is closest to your specs. Also lists the tyres used so you can see how your 245s will look.

If you can't find a setup with these exact specs - find one that is closest then use Mark Sink Offset Calculator to work out what the difference is between your setup and the pics.

http://marksink.com/tire_wheel_offset/offset.html

Otherwise - i got some rims for sale - and they definitely fit ;-) ......see my thread.

I was just about to recommend www.rimtuck.com too.

The easiest way i think to do it would be to try and find a picture or someone with the same if not very similar specs and try to find out what they're lowered on and what tyres and all the specs then work it from there.

All those calculators can be tricky to understand so that's how i worked out my setup by finding a guy in America with a G35 on the exact same wheel specs.

I would recommend finding the wheels & tyres first then fitting coilovers/springs and trialing it to see how it looks then roll the guards, just have to make sure u have access to another car since you don't want to be driving with your tyres rubbing your fenders..

I'm fitting 25mm + 20mm spacers this weekend and i'll need front and rear guards rolled just depends what sort of "stance" you want.

Goodluck! It's certainly not an easy task finding the perfect setup.

Please advise, im not very cluey when it comes to wheels/tyre fitment.

245's on 11 inch rims is just retarded.

You may need a large hammer and an oxy to fit them under, the cops are gunna lurve you long time. :whistling:

^^^ he said 275s on the rear .....

But OP - have you priced up 275 tyres? You will literally fall over when you find out the price of a decent brand - upwards of $500 per tyre.

^^ ah sorry Scott, didn't see the subsequent question ... but OP there is no way that 245s will fit on an 11", and even 275s will be a bit of stretch. I have 265s on my 10" rears and even they need to be massaged a tad when they fitted them to get them to bead and seal. I don't understand why on earth you would want 11" rims.

And Seano, in case I hadn't pointed out previously, spacers are completely illegal and if you have an accident (whether or not you are at fault), if they notice, insurers will not pay your claim. Just something to note.

^^ quite true Nightcrawler.

Same could be said about 45 degree sidewalls, although they assume no-one is that stupid. I doubt a tyre shop would fit them anyway for fear of being sued by the families of the people you would kill.

Relax guys - i think he was just trying to see if he could get away with re-using his existing tyres.

It can certainly be done - whether or not it's wise for a regularly driven car is another story.

This is a 245 on an 11 rear.....

1297760146.jpg

And agree - no good comes from spacers.

Questions are

1. Will 245/35/19 fit on the 19x11 rears? cause atm i have 245/35/19's all round...if not let me know what tyres will fit best

Yes 245/35/19 tyres will fit a 11" rim, i'm running that atm.

2.Will i need to roll my guards?

Definately need to roll your rear guards with a slight pump if youre running that aggressive wheel setup.

3.Do i mount the wheels on first with the tyres then see what sort of drop i will need? springs/coilovers thoughts?

If you're going springs, don't even bother with that wheel set-up, coilovers for sure.

4. If i do need to roll guards, do i need to have the car dropped first and go from there or do i roll them first with wheels at stock height before dropping?

best off rolling the guards first then go from there.

Be aware that if you stretch a 245 on an 11" rim, the ride quality will be TERRIBLE. There is no sidewall flex, and if you hit a decent bump/gutter, it will debead or blow the tyre. Not to mention is completely illegal.

Also be aware that if you want to run 11" rims on the rear, you will need at the very least adjustable lower control arms to add some serious camber. This then wears your tyres very unevenly, and you will find you are buying very expensive tyres on a very regular basis.

I used to run a 235 on a 19x10.5

That was on a 2 tonne Lexus LS400 as well - daily driven - never had an issue.

Yes you chew tyres when your're running extreme neg camber - but I found that running high tyre pressures helped because you convex the tread surface (which rounds the shoulder) and also protects the wheel. Also ran Achilles ATR's - they are 800 tread wear - yes, they're like rocks and grip like a slippery pig - but they last for ever! VIP life yo. Anyway - this is getting O/T.

OP hasn't even come back to post, but he did say in his first post that he would probably run 275 rears.

hey guys thanks for all you thoughts and help in this matter, the reason im going with this setup is cause i have seen the wheels and set up done and i think it looks really good! and also they only offer 9.5f and 11 rears, the offsets were to clear brembos.... i know alot of thought and research is to be done before i do anything...

i will let you know once i have updates...

Cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...