Jump to content
SAU Community

Recommended Posts

Pirelli list reasons for spectacular British Grand Prix tyre failures, point finger at teams
  • By William Dale
  • SPEED
  • July 03, 2013 9:09AM

"What happened at Silverstone was completely unexpected and it was the first time that anything like this has ever occurred in more than a century of Pirelli in motorsport," Paul Hembrey, the company's motorsport director, said.

He called for more in-season testing, as well as pre-season testing in more suitable climates to ensure tyres could be developed in the kinds of conditions faced during the F1 season.

"I'd like to re-emphasise the fact that the 2013 range of tyres, used in the correct way, is completely safe.

"While we wait for a change in the rules, we will introduce tyres that are easier to manage."

Hembrey later clarified Pirelli's statement, pointing out that while the teams were partly responsible for the failures they have also been supportive in the company's search for answers.

"Contrary to the impression that some people have formed, I would like to underline the collaboration and support that we are receiving from the teams, drivers, FIA and FOM.

"In no way are we intending to create arguments or attack anybody. We have taken our responsibilities upon ourselves as our press release indicates.

"But not having full control over all the elements that impact on the use of the tyres, we need everybody’s contribution.

"With regard to this, we are receiving the full support of all the parties involved, for which we are very grateful."



Read more: http://www.foxsports.com.au/motor-sports/formula-one/pirelli-list-reasons-for-spectacular-british-grand-prix-tyre-failures-point-finger-at-teams/story-e6frf3zl-1226673541316#ixzz2XwyEZ0di

Means some people were supposedly fitting them backwards and running low pressures.

Which would be an interesting discussion with inside knowledge. Everyone who drives a road car knows on a basic level that if you underinflate your tyres you will a) cause uneven wear across the tyre face and b) risk having the tire fail due to overstressing the carcass with flexing due to low pressure. However, on a road car, you would obviously have insufficient grip at this point because the tread face has uneven pressure on the road (the outer edges have more pressure and it "bows" up in the middle, that's why it wears unevenly). On an F1 car you don't want this to happen because you have less grip. So the construction of the F1 tyres must be such that they don't bow up like this and running lower and lower pressure keeps giving you bigger and bigger contact patches and more grip. It must also not be overheating the tread face due to flexing or, again, teams would simply run more pressure to make sure the tyre surface doesn't overheat.

If Pirelli have designed a tyre that gives more grip with lower and lower pressures and then "recommended" to teams that they run X pressure then they're still to blame. The tyre should be self-regulating in its design such that running it out of bounds of intended pressures is a detriment to grip, therefore teams won't try and push the limits and cause an unsafe situation. So my opinion is still that Pirelli are idiots, because if the above is true they've dangled a carrot in front of the teams and told them not to eat it.

Which would be an interesting discussion with inside knowledge. Everyone who drives a road car knows on a basic level that if you underinflate your tyres you will a) cause uneven wear across the tyre face and b) risk having the tire fail due to overstressing the carcass with flexing due to low pressure. However, on a road car, you would obviously have insufficient grip at this point because the tread face has uneven pressure on the road (the outer edges have more pressure and it "bows" up in the middle, that's why it wears unevenly). On an F1 car you don't want this to happen because you have less grip. So the construction of the F1 tyres must be such that they don't bow up like this and running lower and lower pressure keeps giving you bigger and bigger contact patches and more grip. It must also not be overheating the tread face due to flexing or, again, teams would simply run more pressure to make sure the tyre surface doesn't overheat.

If Pirelli have designed a tyre that gives more grip with lower and lower pressures and then "recommended" to teams that they run X pressure then they're still to blame. The tyre should be self-regulating in its design such that running it out of bounds of intended pressures is a detriment to grip, therefore teams won't try and push the limits and cause an unsafe situation. So my opinion is still that Pirelli are idiots, because if the above is true they've dangled a carrot in front of the teams and told them not to eat it.

Im not sure all that is correct but the conclusion is unduly harsh. What you have to remember is that there is fk all in the way of testing anymore. Which affects Pirelli massively. The different cars use the same tyres very differently. Up until recently the MB ate them. Lotus, FI & the cheatin pseudo Italian team were gentle on the tyres so prevented Pirelli from implementing the changes they knew would stop the issues they had in England.

So blame, in no particular order, the FIA for their dumb regulations, the teams (three of them anyway) for their selfishness and also Pirelli for making shit tyres.

I'm with Kinks.

In summary Pirelli are saying everything you are doing with the tyres is wrong - camber, pressures, swapping sides with our assymetric tyre (they mean assymetric and directional). Must be alot of tyre engineers in the teams with NFI eh? The name of the game these days has been to make the tyres last during the race. I'll bet my left testie that the pressures and the cambers and even the fact teams are swapping them to the other sides, is all about maximising the tyre's life and performance over the longest period of time, and prevent overheating them or working them too hard. They're not pushing boundaries looking for maximum single lap performance, which will risk their tyres going off in the race. Everything the teams are doing with regard to setup is to take care of the tyres! It's all they ever talk about!

I'm not buying the Pirelli line.

Edited by hrd-hr30

http://formula-one.speedtv.com/article/f1-pirellis-analysis-of-silverstone/

Pirelli’s analysis of Silverstone:

...

The logical conclusion is that it is essential for tires with the performance and technical sophistication of the 2013 range to be regulated and carefully controlled by Pirelli itself. In order to ensure the optimal functioning of the tires, the Italian firm would need real-time data from the teams regarding fundamental parameters such as pressure, temperature and camber angles. While waiting for new regulations that would permit Pirelli access to this data, vital for the development and management of these state-of-the-art tires...

I have coffee on my keyboard...

Edited by hrd-hr30

The problem is that certain teams (everyone knows who they are) complained that the tyres were not good enough and wore out to quick, so Perelli started to change their plans for the year.

It's really unfair for the teams that have built there car to suit the tyres like Ferrari and Lotus. And I also believe this is why the tyres are currently in the worst state they have been. No issues at all last year when everyone was happy enough. This year when the teams have started forcing Perelli into making changes its started to go wrong.

I'm not defending Perelli completely. I'm just saying the blame doesn't lie completely with them, theres no suprise in the championship when you look at whose out in front again when you see that complaints about the tyre have eased from Red Bull. Also this weekend was as far as I'm concerned - proof that Mercedes at least gained something out of their slap on the wrist test.

Lotus have been falling behind anyway. Ferrari suffered blowouts like the rest of them. Red Bull are the ones doing the best job overall on the new tyres and they're the most outspoken critics of them.

From Hungary onwards it's last year's construction with this year's compounds. The degradation issues teams had performance isues with are to do with the compounds, so it's not a total loss for Lotus or Ferrari, although the Kevlar belted tyres will run cooler which will probably help Mercedes, Red Bull and Ferrari.

McLaren should wheel the 2012 car out regardless of what tyres are being used!

Mercedes performance last weekend can't really be attributed to the controversial test - the tyres used at the test were next year's tyres and the kevlar belted tyre everyone's been testing in practice at Montreal and Silverstone, not the tyres they used in the race and which Mercedes were the first to blow up! Hardly conclusive proof they benefited from tyre testing...

Those tyres will be used as an interim measure this weekend.

Edited by hrd-hr30

You mean the office that took the fastest car in the field and tuned it into a jalopy that cant even break into Q3, is running 6th in the WCC and is 182 points behind the leader with more than half the season still remaining?

That design office?

Perhaps that is a talent... who am I to judge.

You mean the office that took the fastest car in the field and tuned it into a jalopy that cant even break into Q3, is running 6th in the WCC and is 182 points behind the leader with more than half the season still remaining?

That design office?

Perhaps that is a talent... who am I to judge.

But its not that easy is it? If last years car was on the pace they would run last years car. Like Williams would. This years is quicker - its just that everyone else is quicker again.

Which is not to say both cars dont suck teh balls.- clearly they do. Just that every team will produce a dog of a car every so often. Trick is to limit the number of times it happens and not let it destroy your whole business. Hoping theMcLaren Honda & the Willams Mercedes will be better.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...