Jump to content
SAU Community

Recommended Posts

I forgot about the ducting photos.

These two arent from an australian supercar they are from a current Newzealand V8 touring car.

They run a controlled Wilwood calliper and controlled brake duct.

Our local supercars use an almost identical ducting setup thats kevlar.

post-20349-0-14902100-1357117305_thumb.jpg

post-20349-0-73487100-1357117306_thumb.jpg

Hi sorry if I might be hijacking your thread, but this seems to be the best place to ask.

I drive a 99 R34 25GT, at the moment it's a daily driver but it's also a long term project car (Engine won't really be touched until I get myself another car for a daily driver).

I've taken it on one track day so far and I'm looking at taking it on the track a couple of times a year if that, nothing too crazy.

But I'm looking at upgrading my brakes with a big brake kit. I was looking at the D2 kits but I'm not sure what I should be getting. Can someone please give me a couple of options on what to get? I'm not sure on rotor sizes either. I'm hopefully getting TE37s soon also so they would have to fit under those..

Thanks for any help in advance

I forgot about the ducting photos.

These two arent from an australian supercar they are from a current Newzealand V8 touring car.

They run a controlled Wilwood calliper and controlled brake duct.

Our local supercars use an almost identical ducting setup thats kevlar.

post-20349-0-14902100-1357117305_thumb.jpg

post-20349-0-73487100-1357117306_thumb.jpg

So is the air and water vapour mixture just directed onto the face of the rotor on that side?

Hi sorry if I might be hijacking your thread, but this seems to be the best place to ask.

I drive a 99 R34 25GT, at the moment it's a daily driver but it's also a long term project car (Engine won't really be touched until I get myself another car for a daily driver).

I've taken it on one track day so far and I'm looking at taking it on the track a couple of times a year if that, nothing too crazy.

But I'm looking at upgrading my brakes with a big brake kit. I was looking at the D2 kits but I'm not sure what I should be getting. Can someone please give me a couple of options on what to get? I'm not sure on rotor sizes either. I'm hopefully getting TE37s soon also so they would have to fit under those..

Thanks for any help in advance

The 330mm D2 kit is the safe bet, they will fit under most 17s. If you want the 355 you will need 18s, the TE37 design is great for caliper clearance and should not be an issue. Really, the question should be what size tyres do you want to run (17s are much cheaper than 18s) then choose the wheel, then choose the larger or smaller brakes to suit. Either kit will be fine unless you use the brakes more than you need to ;)

Brad, we need pics of the other side of the rotor...I'm willing to bet the vent runs to the centre of the disc not the outside face, but that's not how it looks in those pics

here is a couple from both sides of a VY taxi.

This car has a front mounted rack unlike the previous car that was rear mounted.

The ducts on this one are mounted at the front of the upright obviously.

The NZ VY has a very similar thing but smaller.

post-20349-0-25108400-1357169582_thumb.jpg

post-20349-0-28673800-1357169585_thumb.jpg

post-20349-0-21352100-1357169587_thumb.jpg

post-20349-0-44282800-1357169589_thumb.jpg

post-20349-0-49515000-1357169591_thumb.jpg

There is a carbon peice that locates onto the duct which adapts into a 3inch spiral tube to allow the flex before entering very similar kevlar ducting to the front bar.

The kevlar parts from that VY are removed at the moment and being repaired.

lots of space when there is no driveshaft going to the hub eh? Interesting the shape of that final duct, I bet they have done a lot of testing about how much air to aim directly at which part of the disc vs how much to direct at the centre

Real race cars only have two drive shafts Duncan ;)

I wouldn't want to change the ducts that's for sure. That car has done 3 Bathurst 1000 events and finished all 3 times as well as sandown enduros so if say they did something right.

The differences between teams is interesting to look at though.

A lot of the time they run the cars with the ducting blocked off at the bumper.

Spot on the money. There is a properly made up funnel that crates a neat shape that suit the inside of the rotor.

Jacking up a supercar now to take photo of it.

I see said the blind man! Great job Brad, thanks mate.

No kidding with space due to no driveshafts!!!

Anyone wants Alcon rear kit ? SInce they offer free shipping for rear kit, I will order it, and will keep it for spares, but I thought if anyone wants rear too we can drop price little bit http://www.jdl-brakes.com/alcon-adv-extreme-brake-kit-rear-4-pot-o350x28-nissan-skyline-r32-r33-r34-gtr.html

  • 2 weeks later...
  • 2 weeks later...

Anyone wants Alcon rear kit ? SInce they offer free shipping for rear kit, I will order it, and will keep it for spares, but I thought if anyone wants rear too we can drop price little bit http://www.jdl-brake...33-r34-gtr.html

I got mine Alcons from JDL, great service and stuff

These seem to be pretty cheap http://www.ebay.com....=item2ec12dc8e3

Does anyone have experience with them?

I bought my first R32 GTR with Wilwood 330 mm kit on it. It was good, but not better than Brembo from R34 which I fitted few months later. Maybe I had some issue with pads from this kit, and that's why it didn't perform as it should. Anyway, I wasn't happy. It's still my #1 http://www.jdl-brakes.com/special-offer-alcon-adv-extreme-brake-kit-front-and-rear-nissan-skyline-r32-r33-r34-gtr.html

Those wilwoods are a very average setup overall.

The callipers have a terrible open bridge design and they flex horribly. The lug mounts they use also flex a lot if you dont have the callipers spot on centred to the rotor.

I've used them on lighter road cars like MX5's and pulsars in the past with little problems

I fitted a set up to a Toyota 86 a fortnight ago only to remove them after a track day and change over to an AP calliper. The pedal feel was horrendous at 3 corners at Wakefield park.

AP's being tested on Wednesday but already on the road they feel so much nicer under firm braking.

  • 3 weeks later...

I have Alcon front kit with 343 mm rotors, but thinking about these kits http://www.jdl-brakes.com/special-offer-alcon-adv-extreme-brake-kit-front-and-rear-nissan-skyline-r32-r33-r34-gtr.html What wheel do I need to clear 6 pistons calipers with 365 mm rotors ? 18x9 +15 would be ok ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...