Jump to content
SAU Community

Recommended Posts

I have Alcon front kit with 343 mm rotors, but thinking about these kits http://www.jdl-brakes.com/special-offer-alcon-adv-extreme-brake-kit-front-and-rear-nissan-skyline-r32-r33-r34-gtr.html What wheel do I need to clear 6 pistons calipers with 365 mm rotors ? 18x9 +15 would be ok ?

What wheels specifically? A R34 GTR rim won't really work as any small stone that gets caught between the caliper and wheel will get caught for example.

At JDL website, you can download caliper profile, and check clearance with your wheels : http://www.jdl-brakes.com/alcon-adv-extreme-brake-kit-front-6-pot-o365x32-nissan-skyline-r32-r33-r34-gtr.html

From my experience 9x18 ET15 will work ok with Alcon 6 piston caliper.

Will depend on the type of rim, I used the template and it did not clear my 18x10 +15 work meisters deep dish

Which model of work meisters do you have ?

My brother-in-law, has 18x9.5 +23 meisters on his R33GTR, and there is still 4-5 mm of clearance. Did you use template properly ?

Did you mean 6 pot Alcon kit as here : http://www.jdl-brakes.com/alcon-adv-extreme-brake-kit-front-6-pot-o365x32-nissan-skyline-r32-r33-r34-gtr.html

It would all depend on the disk faces of the rim:

R disk for: big caliper clearance.

A disk for: meh calipers.

O disk for: who cares about stopping, take the calipers off and get as much diiiiiish as you can.

mine are O disk, due to dish it tapers back on the back of the rim which fouls the calipers

It would all depend on the disk faces of the rim:

R disk for: big caliper clearance.

A disk for: meh calipers.

O disk for: who cares about stopping, take the calipers off and get as much diiiiiish as you can.

Is the ATTKD brake kit from just jap the same product as D2's?

Also, UAS has a few interesting big brake kits under $3k

http://nismo.com.au/pricelists/pricelist_gtrbrakes.htm

Are they worthwhile upgrades? Namely the AP Racing upgrade

Which one is the 3k? Most prices appear to be either front or rear kits only not a set, may as well jump on the D2 groupbuy

Is the ATTKD brake kit from just jap the same product as D2's?

Also, UAS has a few interesting big brake kits under $3k

http://nismo.com.au/pricelists/pricelist_gtrbrakes.htm

Are they worthwhile upgrades? Namely the AP Racing upgrade

  • 2 weeks later...

Cheers thanks for the feedback

Will these fit under a lmgt4 18 x 9.5 +12? and yeah ive seen the template but im a lazy bastard lol

6CF28A3A-64B1-4D3B-85ED-AC1446AD8C5F-147

Yep. Here they are on mine (Using GTR JOEY's LM's at 18 x 9.5 + 12). They don't really fit under a R34 GTR wheel. Yes the wheel will go on, but there is so little room that little stones get caught between the caliper and the wheel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...