Jump to content
SAU Community

Recommended Posts

I have Alcon front kit with 343 mm rotors, but thinking about these kits http://www.jdl-brakes.com/special-offer-alcon-adv-extreme-brake-kit-front-and-rear-nissan-skyline-r32-r33-r34-gtr.html What wheel do I need to clear 6 pistons calipers with 365 mm rotors ? 18x9 +15 would be ok ?

What wheels specifically? A R34 GTR rim won't really work as any small stone that gets caught between the caliper and wheel will get caught for example.

At JDL website, you can download caliper profile, and check clearance with your wheels : http://www.jdl-brakes.com/alcon-adv-extreme-brake-kit-front-6-pot-o365x32-nissan-skyline-r32-r33-r34-gtr.html

From my experience 9x18 ET15 will work ok with Alcon 6 piston caliper.

Will depend on the type of rim, I used the template and it did not clear my 18x10 +15 work meisters deep dish

Which model of work meisters do you have ?

My brother-in-law, has 18x9.5 +23 meisters on his R33GTR, and there is still 4-5 mm of clearance. Did you use template properly ?

Did you mean 6 pot Alcon kit as here : http://www.jdl-brakes.com/alcon-adv-extreme-brake-kit-front-6-pot-o365x32-nissan-skyline-r32-r33-r34-gtr.html

It would all depend on the disk faces of the rim:

R disk for: big caliper clearance.

A disk for: meh calipers.

O disk for: who cares about stopping, take the calipers off and get as much diiiiiish as you can.

mine are O disk, due to dish it tapers back on the back of the rim which fouls the calipers

It would all depend on the disk faces of the rim:

R disk for: big caliper clearance.

A disk for: meh calipers.

O disk for: who cares about stopping, take the calipers off and get as much diiiiiish as you can.

Is the ATTKD brake kit from just jap the same product as D2's?

Also, UAS has a few interesting big brake kits under $3k

http://nismo.com.au/pricelists/pricelist_gtrbrakes.htm

Are they worthwhile upgrades? Namely the AP Racing upgrade

Which one is the 3k? Most prices appear to be either front or rear kits only not a set, may as well jump on the D2 groupbuy

Is the ATTKD brake kit from just jap the same product as D2's?

Also, UAS has a few interesting big brake kits under $3k

http://nismo.com.au/pricelists/pricelist_gtrbrakes.htm

Are they worthwhile upgrades? Namely the AP Racing upgrade

  • 2 weeks later...

Cheers thanks for the feedback

Will these fit under a lmgt4 18 x 9.5 +12? and yeah ive seen the template but im a lazy bastard lol

6CF28A3A-64B1-4D3B-85ED-AC1446AD8C5F-147

Yep. Here they are on mine (Using GTR JOEY's LM's at 18 x 9.5 + 12). They don't really fit under a R34 GTR wheel. Yes the wheel will go on, but there is so little room that little stones get caught between the caliper and the wheel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...