Jump to content
SAU Community

Recommended Posts

Ahhh this thread could get interesting

I want for my GTR:

  • Few nice carbon fibre bits
  • To finish off the fuel system
  • A larger exhaust
  • A hollinger sequential gearbox
  • A big set of balls to help me while I hold on for dear life after all that's done :D

  • Like 1

Really need one of these things, its from in the back of R32 GTR headlights.

So if you have a smashed one please look, ill buy it.

post-89755-0-53728700-1355110215_thumb.jpgpost-89755-0-69441700-1355110242_thumb.jpg

Its an adaptor for the high beam globe.

Dad might have one left over from his smashed lh headlight. I'll point him towards this and let you know

Any one have a staggered set of rims in about 17x8/17x9 with +30 or +35 is offsets for cheap? As light as possible would be awesome lol or even just a pair of rims in either of those sizes would be cool. Need a set of track rims for the mr2 :D

Almost forgot... Need to be 5x114.3 stud pattern please and thankyou

Edited by ryu1605

You should drop an aurion engine into it....and then supercharge it.

That thought has definitely crossed my mind lol. Only problem with the 2gr v6 is that to change to front 3 spark plugs you either have to drop the engine out or cut a hole in the firewall behind the seats in the cabin haha

Really need one of these things, its from in the back of R32 GTR headlights.

So if you have a smashed one please look, ill buy it.

post-89755-0-53728700-1355110215_thumb.jpgpost-89755-0-69441700-1355110242_thumb.jpg

Its an adaptor for the high beam globe.

Just checked with dad, broken headlight is long gone, sorry dude

Any one have a staggered set of rims in about 17x8/17x9 with +30 or +35 is offsets for cheap? As light as possible would be awesome lol or even just a pair of rims in either of those sizes would be cool. Need a set of track rims for the mr2 :D

Almost forgot... Need to be 5x114.3 stud pattern please and thankyou

PM sent.

Looking to Buy;

R33 Rear Pods - White

R33 Side Skirts (Do luck, GTR or standard) -White

Series 2 Drivers and Passenger Seat, Possibly Rears aswell.

A Decent Headunit - Pioneer or other decent brand

Turbo Back Exhaust system - Let me know what you have

Cheers,

Ryan

0404348290

Looking to Buy;

R33 Rear Pods - White

R33 Side Skirts (Do luck, GTR or standard) -White

Series 2 Drivers and Passenger Seat, Possibly Rears aswell.

A Decent Headunit - Pioneer or other decent brand

Turbo Back Exhaust system - Let me know what you have

Cheers,

Ryan

0404348290

Hey mate,

I have a rear seat, drivers seat, and a turbo back system if your interested pm me

Looking to Buy;

R33 Rear Pods - White

R33 Side Skirts (Do luck, GTR or standard) -White

Series 2 Drivers and Passenger Seat, Possibly Rears aswell.

A Decent Headunit - Pioneer or other decent brand

Turbo Back Exhaust system - Let me know what you have

Cheers,

Ryan

0404348290

I have the 2 fronts and rear 33 s2 seats, pm me if you're interested in them.

Really need one of these things, its from in the back of R32 GTR headlights.

So if you have a smashed one please look, ill buy it.

post-89755-0-53728700-1355110215_thumb.jpgpost-89755-0-69441700-1355110242_thumb.jpg

Its an adaptor for the high beam globe.

Found one in my big bag of electrical stuff, dunno how it got there and its a fluke finding it since its such a big bag of everything.

:blush: thanks for looking for one guys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...