Jump to content
SAU Community

Recommended Posts

I do get all of my work done at PERFORMANCE GARAGE in phillip by danny he knows his cars thats for sure no job too big or too small, servicing to engine conversions.

have to agree, Danny has done a fair bit of work on my 200 and he's always helpful, honest and very competively priced.

Highly recomend: 0437603885

While I'm replacing my Turbo and putting my Clutch & Brake pedal in I decided to do a bit of maintenance work on the old RB25. While pulling the intake piping apart, I've managed to split quite a few hoses both for oil and intake. Who knows a good place to go to get replacement pipes & so on? I know autobarn have some silicon hoses for the intake, but I was thinking more for the oil lines. Otherwise I'll just go to Nissan and get the factory ones.

  • 2 weeks later...
have to agree, Danny has done a fair bit of work on my 200 and he's always helpful, honest and very competively priced.

Highly recomend: 0437603885

do you know the address at all? can't seem to find them online or in the yellow pages..

I know I sound like a broken record at times on here - But i can't recommend Marc, Stewie and the boys down at Belconnen Discount Tyre Service enough. Sure my car isn't on time - but they get things done properly and keep me informed all the way.

Seriously.

I'd recommend them for anything upto performance tuning/turbo work - even then, i'd probably give them a go.

02 6251 5977

I know I sound like a broken record at times on here - But i can't recommend Marc, Stewie and the boys down at Belconnen Discount Tyre Service enough. Sure my car isn't on time - but they get things done properly and keep me informed all the way.

Seriously.

I'd recommend them for anything upto performance tuning/turbo work - even then, i'd probably give them a go.

02 6251 5977

I concur, they're doing my gearbox conversion for me. It's a bit of a tricky swap but they're still willing to give it a go. It helps that Marc has a manual Stagea already to compare with.

Thx for the tip about Goodyear tyres in Belco, have taken the car there before, but didn't know they specialised in servicing imports to. Very happy with their other work, so may book in the car to get servicing done, as im on the northside as well.

Well the owner has had 2 Stageas now and also an ATESSA Bluebird. I don't know if they specialise in them, but they're certainly getting to know them.

The boys are starting to know them, quite a few skylines are going through there.

I've been looking for a good deal on Turbos for my GTR, so I called COOMA DIESEL and unfortunately had to talk to a very rude, sarcastic woman who not only wouldn't give me even a $50 discount on 2 X $1,500 turbos, but wouldn't even TELL ME WHAT THE PART WAS!!!! unless I agreed to purchase them. I would definately recommend that everyone on this forum stay away from this place.

If anyone knows where to get a good deal on turbos I would love to know. I'm looking for ones around the 300-350 hp mark.

Edited by cactu5

Sadly over the weekend i put a nice big scratch and took a chunk of paint off my front bar and decided it was time to get it resprayed (paint is crackling at the top of it etc... needs some TLC.) i'm not looking to do the whole car, just the bar. Anyone know of a good place to take it?

Sadly over the weekend i put a nice big scratch and took a chunk of paint off my front bar and decided it was time to get it resprayed (paint is crackling at the top of it etc... needs some TLC.) i'm not looking to do the whole car, just the bar. Anyone know of a good place to take it?

whatever your decision is DO NOT go to a place in Fyshwick that starts with N, contains a part of it's name that you put in your hair and is 6 letters long... I only just realised that in certain sunlight the bit's I had re-sprayed didn’t even look black almost a grey :dry:

I've been looking for a good deal on Turbos for my GTR, so I called COOMA DIESEL and unfortunately had to talk to a very rude, sarcastic woman who not only wouldn't give me even a $50 discount on 2 X $1,500 turbos, but wouldn't even TELL ME WHAT THE PART WAS!!!! unless I agreed to purchase them. I would definately recommend that everyone on this forum stay away from this place.

If anyone knows where to get a good deal on turbos I would love to know. I'm looking for ones around the 300-350 hp mark.

mate the best prices I could find were at CRD

Cheers

whatever your decision is DO NOT go to a place in Fyshwick that starts with N, contains a part of it's name that you put in your hair and is 6 letters long... I only just realised that in certain sunlight the bit's I had re-sprayed didn’t even look black almost a grey :D

i cannot figure that out, too cryptic, give me a clue :D

:D well i know we are not allowed to publicaly say the business name i have not directly done it i hope it is allowed to stay. for anyone who does not get who i am talking about feel free to pm me.

i cannot figure that out, too cryptic, give me a clue :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...