Jump to content
SAU Community

Recommended Posts

did some electrical work on the weekend - always so time consuming because I've learnt the hard way over the years that taking shortcuts and rushing the job will always cause headaches down the track. So i spent two days installing my reverse camera, and installing the amp. See pics below:

1. Alpine PDX-V9 - this is a 5ch amp that will run my entire system. It has 4x100wrms and 1x500wrms but birth sheet shows a fair bit higher numbers. It should pack a punch. But not only that, it's smaller and about half the weight of the mono block it replaces. I love it. I mounted it under the floor for a clean stealthy install. Took the TV tuner and mounted it where the Bose amp used to be, and put the Alpine where the TV Tuner used to be. Used all stock brackets, no cutting or drilling - so 100% reversible (the best kind of mod).

IMG_1005-2.jpg

2. Even though it's a digital amp and runs a lot cooler than a traditional A/B amp - it's still a very enclosed location. Decided to install a little 12V computer cooling fan to extract heat from that compartment into the spare wheel cavity. It's hooked up to the remote wire so it comes on whenever the amp is on. Had to cut a hole in the plastic trim - but I reckon it looks pretty sweet and functional.

IMG_1006-1.jpg

IMG_1007.jpg

3. All hidden away from prying eyes and protected from flying boot fodder. . Maximum boot space. That's a win in my books!

(ignore spider grill thing - came with the car, and ironic because i'm hyper arachnophobic - that will be going once i decide on a new sub).

IMG_1009.jpg

R6n350GT :

When you go for the dyno, do a run with and without the plenum spacer in. I did a test on my car and actually lost 3-5 kw through the mid range with the spacer in at 6psi. Spacers are designed for NA cars, I'm not sure they provide a benefit when turbod. Test it out.

R6n350GT :

When you go for the dyno, do a run with and without the plenum spacer in. I did a test on my car and actually lost 3-5 kw through the mid range with the spacer in at 6psi. Spacers are designed for NA cars, I'm not sure they provide a benefit when turbod. Test it out.

I will do, wonder if i even have the old shorter bolts.. ? can i use longer bolts still ?

I thought g35driver had done dynos showing good for FI?

Cant wait to get it done !!

Turbo be arriving this week so its getting closer :)

Need to find guy that does custom piping in goldcoast

Yeah, I got told it was good for Fi too, bought one, and installed it on the dyno. Didn't gain shit, lost power.

You might be able to use those bolts, but you'll need to find some bolts for the middle 6.

What's the plan? Gt35 or t51?

Yeah, I got told it was good for Fi too, bought one, and installed it on the dyno. Didn't gain shit, lost power.

You might be able to use those bolts, but you'll need to find some bolts for the middle 6.

What's the plan? Gt35 or t51?

HKS 3037Kit but modified so FMIC and 3582 CHRA inside the 3037 housing

Fully built engine with S2 BC Cams

Nice.

will be interesting, but surprised you didn't go to a T3 housing. I think the 1.12 housing in the kit is T2 isn't it?

i was talking to scotty about that, seemed there would be alot of fab work changing adapters, making room etc and didnt want to risk it not fitting :/

There would be.

At the end of the day - it has a 60mm gate for excess pressure, and should have enough flow to keep the GT35 spinning at a decent rate.

Dyno graph when done please :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
    • Add more solar panels to the array. Call the electricity company and tell them you're moving out... Live off grid electric wise
    • Hi Jasmine. How's the war going?
×
×
  • Create New...