Jump to content
SAU Community

Recommended Posts

Mat- How do the BC's ride? I have a set waiting to go in the car pretty excited and would like a bit more of a drop nothing too illegal though..

Edited by Seano350GT

I know like any mass produced coilover where they overcome limited valving options using different spring rates that the ride can be hit and miss but the research i did on people using them in 350's and on g35driver suggested they were very good in this platform. Similar to when i had my 530 M-sport - all the e39 M5 owners swore by them, even over much more expensive german coilovers. Sometimes they just get it right.

As for preload - there are pretty specific instructions, especially in the rear due to the OEM style setup (separate spring and shock). As i said, i haven't driven the car yet. I'll wait for the springs to settle first, then I'll adjust height and preload - then do my damping. But i'm also missing one 20 inch rim at the moment, with a 17 in it's place - so it's sitting a bit skew-if at the time being, can't do any adjustments till i get that wheel back.

Sean - the drop is pretty flexible. I have a good 1.5 inches up and down from where they are right now. I'm not about riding it in the weeds, but if you wanted to go low you could. At the height it currently sits, it is 100mm clearance at plastic cover in front of the rear subframe and 110mm at the undertray at the front, and I'm pretty happy with the way the wheels sit in the gaurds, but will plan to drop it a little more at the front, but I want to maintain 100mm clearance.

Sweet thanks for the info. When i looked into coils i originally was gonna go with Stance GR+ - All the american's said they're amazing and ride so much better than the BC's and blah blah blah but i couldn't justify the extra $400 (inc shipping) to get them here when the reveiws i read on the BC BR's were awesome.. Plus the fact that Boostn Imports in Brisbane stocks these for our car and got a great price. I am keen to get them on the car, have no intentions to "slam" it but i will be pushing it in terms of legal height same story as you Mat.

Wasn't sure what size to run up the front, so decided to buy some china 215/35's and see how clearances are then maybe go to something a bit wider in a decedent brand in a month or 2

Also lowered the car about 1cm at the front which is now max low without taking helper springs out

So it is now effectively 19x9-11 with 215/35/19 and 19x10.5-3 with 245/35/19

20130411_134446_zps2fdc84da.jpg

20130411_134453_zps31920668.jpg

20130411_134509_zps8fc72ca0.jpg

really cheap cost $10 a month to sign up, they will hold an item for up to 90 days, then you can consolidate it all into one box as I did above, costs $2 an item then whatever it cost to send the box.

That box cost me like $90 to send, but in comparison I also had 2x sunnies in there that through the online checkout they wanted $100 alone to ship to aus.

All up for 6 items it maybe cost $120-150 for the fright forwarding servies + internal us shipping (this was $10-15 at most an item)

I think I easily saved $200 compared to getting them shipped individually. Only bad thing is the warehouse of the people I used is in CAL which means everything gets a 8% tax (like GST) but only applies if getting sent to california..... Still Ill defiantly use it again in the future.

I am thinking about going back to a K&N dropin filter and a stillen z tube combo, the injen cold air intake makes a bit of noise but it doesn't do much. Plus i am a clean freak it's a bit of a pain polishing the piping lol.. and it'd make changing/cleaning the air filter ALOT easier having it up top rather than removing the bumper to do so..

stock Intake vs Z pipe.

Also removed a resonator at the bottom of the air box so it has a decent induction noise... but not charage with a pod epicness and still look all factory ;)

20130417_110953_zps33ea2e59.jpg

Center caps rocked up so modded the center wheel covers... Wich involeved a lot of drilling and filing as the holesaw had no chance

These turned out a bit to small so going to order some the next size up. Thinking about putting a SSR sticker or something on them as it isnt going to match the alloy of the wheel

20130419_161918_zps851802e1.jpg

Whole car pic with the clear indicators on as well

20130419_161909_zpsd135f818.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...