Jump to content
SAU Community

Recommended Posts

Good news, had dump and wastegate pipes fabricated yesterday.. Chucked the Haltech into Closed Loop O2 mode and went for a nice 40 minute cruise. Car sounds amazing and has not missed a beat so far. Drove it into work and will be dropping the oil tonight to fill up with some fresh Synthetic SN rated oil and will try and book some dyno time in the coming days.

Here's an underside shot :) Suprisingly the car is quiet when cruising! Almost quieter than my old 3" system.. Weird..

0KhFAgvl.jpg

Had a couple of hours on the dyno at work tonight.. Just cleaned up the fuel map mostly and made sure the thing wasnt going to destroy itself.. My very amateur ability resulted in this:

zThpBLSl.jpg

Cant wait to get some more dyno time and see what happens when i put some boost into it. :D

  • Like 1
  • 1 month later...

Got some dyno time this afternoon, dialled in some boost through the mid-range.. same outright power but plenty of punch from 3000 onwards! Peak boost here is 20psi, i havnt had a good dig through the logs to see how smooth the curve is but theres still some work to be done in my fuel mapping as the AFR's are a bit rich and slightly wonky..

TNkspLcl.jpg

That 200-250rwkw at 3-4k is a lovely thing. :)

Had an awesome evening and it was great chatting to guys in the staging lanes while waiting to run.

First run i took it easy off the line and shifted into 5th early.. 12.89@97mph

Second I stayed into it a bit but ran out of legs in 4th and did a 11.91@124mph

The next few runs were all high 11's at ~122mph

Had a break and got some food then went back out for a couple more sessions..

Managed an 11.54@125mph then an 11.59@125mph

Definitely keen to get back out there with some proper rubber :)

LUXGHHZl.jpg

  • Like 1
  • 3 months later...

I completely forgot to update this thread after posting graphs in other sections of SAU.

Soo, this was the result after a night on the dyno and 26psi. Still pretty safe at this point.

Gonna get back to the drags on some ET Streets and then Cootamundra in May and attempt to play with the big boys.

gAl4ZNEl.jpg

  • Like 1
  • 1 month later...
  • 2 weeks later...

Man this is so ridiculously insane for a rwd, but I love the attention to detail. I also love "lack of funds" but you go straight for an rb34 build hahaha. Great work on this, it's nice to see a GTT get some loving.

Had some more dyno time last night after some much needed upgrades.. Fitted the car with a new gearbox with OS internals, OS diff and new clutch. Also re-did the breather setup in the engine bay and fitted the car with a real-time GPS tracking system I designed.. ;)

OJY3pMDl.jpg

cfhKR07l.jpg

LGABnvdl.jpg

Now with 29psi and being slightly more aggressive with mixtures and timing i've passed the 800rwhp barrier with 824rwhp at ~7300rpm.

2X64LCCl.jpg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...