Jump to content
SAU Community

Recommended Posts

 

go on, let me in your 32.

last one i sat in still isnt running...

 

I lived with Richard for 18 months and never got to go for a ride :(

Haven't gone for a ride in his 32 either!

What did I do to my car today ? Ummm - picked up a parking fine.

Went for another spirited drive after work out through Tharwa and looks like I' need my clutch rebuilt/replaced now.

Living life a quarter of a mile at a time. Tis expensive lulz !! Launching can = lunched :P

having an awesome weak. Caught up in 3 queues due to accidents, 1 parking fine and now a lunched clutch.

Well I shouldn't really complain as the OS giken twin plate has been in since before I bought the GTR 10yrs ago.

You have to expect to go right through your drive train from engine to rear diff over time. Shift the power to find the next point of failure.

GB next ? yes it's likely.

Last night I took the gearbox off again and replaced the front cover allowing the thrust bearing to slide all the way back, so no more slipping clutch :D

Today I got a buff on the car and got my drivers seat back from my upholster. Wont be able to fit it today as I just got home from ED after slicing my leg with a box cutter :D

Edited by Zippo8

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...