Jump to content
SAU Community

Recommended Posts

Hi Jimmy - as you know I have but I went the new outer window trim route.

I'd go have a look at either Spotlight and look for something similar in a material.

It's like a white shag small material.

Remove the existing bushes (both). - Use a hand held razor blade and maybe some turps to remove the glue.

Glue the new bushes to the plastic backing and let dry

Re-Install.

Both sides :) (bout 30mins effort)

Perhaps Supercheap or Bunnings may have something similar.

It's really just a 4-5mm bushy length and around 3cm x 1.5

Cheap as cheaps way to replace.

and remove and rinse every 3 months or so to stop the dust scratches re-occurring on the glass

(fairly certain you cant buy just that piece and clip in :( )

Edit: PS new external window trim farkers aren't cheap)

Edited by Sinista32

Hmm - might have been around $115 each I think when I bought mine. But postage is very exy due to length.

all air postage out of Japan is daylight robbery.....SAL less so and sea cheaper still.

Paid $90 bux freight recently for an RH9 alternator. Half the size of a shoe box !

Best idea is to compile a list and save for it all. Then buy and use Sea as delivery method (6-8weeks)

My issue is I cant wait so it goes DHL. RHD & Nengun are my favourite Jap shops.

Some costs - Rear window Trim (only) is $330. Qtr windows about $220 ea.

OEM Windscreen $1700, Dash $1100ish (NAL). OEM GTR Steering wheel around $1k deliverd. C-pillars $140ea

Very True indeed Kat - It is good checking Nissan spare parts first and they don't seem to fluctuate with exchange rates if the parts are in country.

My issue with calling them previously is there not real helpful and never call back. (but I don't have bewbs :/ ) They can be a lot more expensive too and sometimes cant get what you see on RHD/Nengun.

But now having an insider the service is brilliant :thumbsup:

Must admit I picked up mine even cheaper still off someone who bought new, with horn button, and didn't unpack it. Win

I actually lost my insider so I may hit you up at some point knowing that!! :D

I do buy most on RHD admittedly.

Floormats arrived for the GTR on Thurs, they're better than the looked in the pics. Now got to get them to carlovers or somewhere with a steam cleaner for some love!

Door trim (as in inner door card to be specific)

http://www.amayama.com/search/?q=80900-05U00

http://www.amayama.com/search/?q=80901-05U00

There's the parts for both left and right. Label on box has them as "Finisher-Door"

Door trim (as in inner door card to be specific)

http://www.amayama.com/search/?q=80900-05U00

http://www.amayama.com/search/?q=80901-05U00

There's the parts for both left and right. Label on box has them as "Finisher-Door"

Yep, all of their stuff is NEW OEM :)

By door trim, I meant rubber strip for outside of window, confusing myself haha

Edited by Scar

:excl: HAIL ALERT! :excl:

Small hailstones in west belco, so its heading your way.

Not damaging yet, but can easy get bigger without any warning.

Yes had small hail here earlier (bruce) Edited by Scar

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just had this happen to me too.  R32 GTR.   Also broke "just before going out onto the track" - someone up there is looking out for us... Very scary since I was about to do a narrow street course with zero run-off and curbs everywhere. Many people on here upgrading to billet uprights and R35 bearings?   Or buying new OEM knuckles?  I am not keen to replace with another s/h 30 year old fatigued part.
    • Top off with distilled water and see what happens. If you keep losing coolant then you know to start looking.
    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
×
×
  • Create New...