Jump to content
SAU Community

Recommended Posts

Hi Jimmy - as you know I have but I went the new outer window trim route.

I'd go have a look at either Spotlight and look for something similar in a material.

It's like a white shag small material.

Remove the existing bushes (both). - Use a hand held razor blade and maybe some turps to remove the glue.

Glue the new bushes to the plastic backing and let dry

Re-Install.

Both sides :) (bout 30mins effort)

Perhaps Supercheap or Bunnings may have something similar.

It's really just a 4-5mm bushy length and around 3cm x 1.5

Cheap as cheaps way to replace.

and remove and rinse every 3 months or so to stop the dust scratches re-occurring on the glass

(fairly certain you cant buy just that piece and clip in :( )

Edit: PS new external window trim farkers aren't cheap)

Edited by Sinista32

Hmm - might have been around $115 each I think when I bought mine. But postage is very exy due to length.

all air postage out of Japan is daylight robbery.....SAL less so and sea cheaper still.

Paid $90 bux freight recently for an RH9 alternator. Half the size of a shoe box !

Best idea is to compile a list and save for it all. Then buy and use Sea as delivery method (6-8weeks)

My issue is I cant wait so it goes DHL. RHD & Nengun are my favourite Jap shops.

Some costs - Rear window Trim (only) is $330. Qtr windows about $220 ea.

OEM Windscreen $1700, Dash $1100ish (NAL). OEM GTR Steering wheel around $1k deliverd. C-pillars $140ea

Very True indeed Kat - It is good checking Nissan spare parts first and they don't seem to fluctuate with exchange rates if the parts are in country.

My issue with calling them previously is there not real helpful and never call back. (but I don't have bewbs :/ ) They can be a lot more expensive too and sometimes cant get what you see on RHD/Nengun.

But now having an insider the service is brilliant :thumbsup:

Must admit I picked up mine even cheaper still off someone who bought new, with horn button, and didn't unpack it. Win

I actually lost my insider so I may hit you up at some point knowing that!! :D

I do buy most on RHD admittedly.

Floormats arrived for the GTR on Thurs, they're better than the looked in the pics. Now got to get them to carlovers or somewhere with a steam cleaner for some love!

Door trim (as in inner door card to be specific)

http://www.amayama.com/search/?q=80900-05U00

http://www.amayama.com/search/?q=80901-05U00

There's the parts for both left and right. Label on box has them as "Finisher-Door"

Door trim (as in inner door card to be specific)

http://www.amayama.com/search/?q=80900-05U00

http://www.amayama.com/search/?q=80901-05U00

There's the parts for both left and right. Label on box has them as "Finisher-Door"

Yep, all of their stuff is NEW OEM :)

By door trim, I meant rubber strip for outside of window, confusing myself haha

Edited by Scar

:excl: HAIL ALERT! :excl:

Small hailstones in west belco, so its heading your way.

Not damaging yet, but can easy get bigger without any warning.

Yes had small hail here earlier (bruce) Edited by Scar

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...