Jump to content
SAU Community

Recommended Posts

Hi Jimmy - as you know I have but I went the new outer window trim route.

I'd go have a look at either Spotlight and look for something similar in a material.

It's like a white shag small material.

Remove the existing bushes (both). - Use a hand held razor blade and maybe some turps to remove the glue.

Glue the new bushes to the plastic backing and let dry

Re-Install.

Both sides :) (bout 30mins effort)

Perhaps Supercheap or Bunnings may have something similar.

It's really just a 4-5mm bushy length and around 3cm x 1.5

Cheap as cheaps way to replace.

and remove and rinse every 3 months or so to stop the dust scratches re-occurring on the glass

(fairly certain you cant buy just that piece and clip in :( )

Edit: PS new external window trim farkers aren't cheap)

Edited by Sinista32

Hmm - might have been around $115 each I think when I bought mine. But postage is very exy due to length.

all air postage out of Japan is daylight robbery.....SAL less so and sea cheaper still.

Paid $90 bux freight recently for an RH9 alternator. Half the size of a shoe box !

Best idea is to compile a list and save for it all. Then buy and use Sea as delivery method (6-8weeks)

My issue is I cant wait so it goes DHL. RHD & Nengun are my favourite Jap shops.

Some costs - Rear window Trim (only) is $330. Qtr windows about $220 ea.

OEM Windscreen $1700, Dash $1100ish (NAL). OEM GTR Steering wheel around $1k deliverd. C-pillars $140ea

Very True indeed Kat - It is good checking Nissan spare parts first and they don't seem to fluctuate with exchange rates if the parts are in country.

My issue with calling them previously is there not real helpful and never call back. (but I don't have bewbs :/ ) They can be a lot more expensive too and sometimes cant get what you see on RHD/Nengun.

But now having an insider the service is brilliant :thumbsup:

Must admit I picked up mine even cheaper still off someone who bought new, with horn button, and didn't unpack it. Win

I actually lost my insider so I may hit you up at some point knowing that!! :D

I do buy most on RHD admittedly.

Floormats arrived for the GTR on Thurs, they're better than the looked in the pics. Now got to get them to carlovers or somewhere with a steam cleaner for some love!

Door trim (as in inner door card to be specific)

http://www.amayama.com/search/?q=80900-05U00

http://www.amayama.com/search/?q=80901-05U00

There's the parts for both left and right. Label on box has them as "Finisher-Door"

Door trim (as in inner door card to be specific)

http://www.amayama.com/search/?q=80900-05U00

http://www.amayama.com/search/?q=80901-05U00

There's the parts for both left and right. Label on box has them as "Finisher-Door"

Yep, all of their stuff is NEW OEM :)

By door trim, I meant rubber strip for outside of window, confusing myself haha

Edited by Scar

:excl: HAIL ALERT! :excl:

Small hailstones in west belco, so its heading your way.

Not damaging yet, but can easy get bigger without any warning.

Yes had small hail here earlier (bruce) Edited by Scar

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...