Jump to content
SAU Community

Recommended Posts

Looks like there's room to slot the first hole a bit so it bolts up?

My GKTech one fits perfect :P

I fitted a new modified oil pump and the sump/front covers on the 1uz today. Hoping I got the cam timing right lol

Should've gone gktech!

Even if I mounted the lock bar it wouldn't help. The toe arm bolts are actually too big for the lock bar as well unfortunately

On the weekend i pulled my turbo out as i m going a different set up :)

Found out that there was a few washers broken on the exhaust manifold studs and it was leaking, so ordered new ones.

next is to take the intake side out and the head out so i can change the headgasket and put a 1.5mm oil restrictor in the block

And run more boost.

post-72907-0-03803400-1439266864_thumb.jpg

post-72907-0-13908200-1439266922_thumb.jpg

I m also rebuilding a spare engine which hopefully should be finished early next year.

Can you guys tell me where in canberra or sydney is the best place to go for all the machine work.

Got a quote which is costing around $2000 from one of the shop in canberra, will be doing a few more calling of place to compare the prices.

All work that needs to be done are listed below

Chemically clean block

Surface grind block

Rebore and hone with torque plate

Polish crankshaft per pin

Balance engine

Fit crank collar (supply by me)

supply fit screw in crank plugs

Supply and fit welsh/oil gallery

post-72907-0-77584800-1439266103_thumb.jpg

Edited by 5hiv

So... Rosie is getting:

a new clutch (Xtreme HD single plate)

splitfire coil pack

and the front lip

I also got the paint repaired on my mirrors and right front wheel guard.

I've got a track day on 25th of August so pretty keen for that - hopefully the clutch isn't all too hard.

post-108313-0-38279800-1439454526_thumb.jpg

  • Like 3

Got a front lip painted and installed today.

The past 2 weeks Rosie has had quite a bit done. My last addition is a high stand GTR spoiler. I always said to myself I wouldn't do it but I cannot stand the GTT spoiler so off it comes !

post-108313-0-84457100-1440056274_thumb.jpg

post-108313-0-68421300-1440056276_thumb.jpg

  • Like 2

Very Nice. :thumbsup:

Beware the touch down.

Today is the test with work carpark :( If I crack it 12 hours after installing I will be very upset T_T

Edited by RosieR34

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...