Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Haha yes will put the squeeze on it soon with High boost but it's still on 98 with octane boost

:O I didnt think Octane Boost was recommended for our applications?

Anyway i make similar power at that boost level but i cheat and use E70 fuel :P

:O I didnt think Octane Boost was recommended for our applications?

Anyway i make similar power at that boost level but i cheat and use E70 fuel :P

Yea some people have opinions on octane I don't mind changing copper plugs every 5000 for the price they are.

I am changing to flex fuel soon with an aero motive fuel set up.

Is your car on YouTube on Dyno by the way ?

Yea some people have opinions on octane I don't mind changing copper plugs every 5000 for the price they are.

I am changing to flex fuel soon with an aero motive fuel set up.

Is your car on YouTube on Dyno by the way ?

Yep there are a few of it on the dyno on Youtube... The latest one is titled 387kw/391kw something something!

Yep there are a few of it on the dyno on Youtube... The latest one is titled 387kw/391kw something something!

Nice man yea is making good power is it a built motor ?

I've seen Nismo 555cc topping out at around 300rwkw I've never seen 660's start to top out that early. Correct me if I'm wrong?

Mine are on 98 caltex and 360kw and not topping out. Should get over 400 with them easy

555 nismo's that is

Edited by abr33

Mine are on 98 caltex and 360kw and not topping out. Should get over 400 with them easy

555 nismo's that is

Interesting, so maybe 600cc injectors are more than enough for ~300rwkw.

Any further experiences either way anyone?

A rough rule of thumb is that 555cc injectors will deliver enough pump fuel for about 555hp which is about 408kw (flywheel).

Converting back to a number at the wheels probably around 330rwkw (allowing for 100hp loss through the drivetrain.......lets not turn this into a shit fight about fixed vs % loss)

Interesting, so maybe 600cc injectors are more than enough for ~300rwkw.

Any further experiences either way anyone?

600cc is more than enough for 300kw on 98, the nismo 555cc are common with 300kw..

Haha yes will put the squeeze on it soon with High boost but it's still on 98 with octane boost

don't know bout octane booster, would be cheaper to just add a mix of E85 wouldn't it?

Nice man yea is making good power is it a built motor ?

100% stock motor... If Mat were playing a game of thrones, there would be many a man on here looking jealously at his seat, including me :laugh:

Edited by Hanaldo

That's impressive man well done on it!

Yea still got a bit of Dyno time to come.

Want to see if I can get back above 400kw on pump gas without levels getting hectic lol

don't know bout octane booster, would be cheaper to just add a mix of E85 wouldn't it?

Yea haven't really looked much into mixing. It the up coming months hopefully changing to flex fuel.

With an aero motive twin pump set up.

Will be interesting

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...