Jump to content
SAU Community

Sau Vic 2013 Motorsport Championship Round 1 - Pi 2Nd Feb


Recommended Posts

So the first round of the MS championship will be PI on the 2nd Feb with the wrx club.

This will be the first weekend open after the resurfacing so will be a great day.

entry

https://secure1.ilisys.com.au/wrxc/motorsports/Introduction.php

Sup Regs

http://www.wrx.com.au/ms/Current_Supp_Regs.pdf

Full championship season will be announced soon

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

ya just got posted up, first post has direct links to entry and sup regs.

Hope to ahve the 1st half of season posted next week.

some delays due to calder messing things up and waiting of Nats dates

but looking to be a good one.

hopefully will be out there for the last couple rounds

Wow $240 for a 75db day, whereas the VSSC day is $215 for a 95db day (if you enter two weeks prior) :wacko:

Hi Martin, for next few events, might want to add a note on front page highlighting that WRX will send entry details with disclaimer and scrutineering sheet to be completed by entrant.

entered

any premeets to cruise up there before?

generally not, as ppl coming from everywhere, some towing some driving

more often come back as a "group" stop at maccas or similar.

i'm planning on coming up and spectating a bit during the day and getting some pics in.

generally not, as ppl coming from everywhere, some towing some driving

more often come back as a "group" stop at maccas or similar.

i'm planning on coming up and spectating a bit during the day and getting some pics in.

fair enough

how come your not entering this round?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...